Before using the terminal
34
◆
Installing/Removing microSD card
・
Install/remove after unmounting microSD card (cancel
recognition) (
P139) or turning off the power.
■
Installing
a
Open the slot cap hooking the groove with your fingertip
→
b
Check if the display side of the terminal is faced down and
face down the metal contacts of microSD card, then insert
into the microSD card slot until it clicks
c
Press firmly the slot cap of the terminal to close
■
Removing
a
Open the slot cap hooking the groove with your fingertip
→
b
Push the microSD card lightly and release it, then pull the
microSD card straight out
c
Press firmly the slot cap of the terminal to close
✔
INFORMATION
・
Note that the microSD card may jump out of the terminal
when removing it.
Slot
ca
p
Slot
ca
p