13
Contents/Precautions
Handling precautions
■
Do not get the terminal wet.
The terminal, battery pack, adapter, docomo mini UIM card are not
waterproof. Do not use in a bathroom or other highly humid area or do not let
rain touch. Or putting the terminal on your body, humidity of sweat may
cause internal corrosion and malfunction. Note that malfunctions, which are
determined to be caused by water as result of inspections, are not covered
by the warranty.
Since these conditions are outside the scope of the warranty, a repair, if at
all possible, is charged.
■
Clean the terminal with a dry soft cloth (such as a cloth for eyeglasses).
・
Rubbing it roughly with a dry cloth may scratch the display.
・
Drops of water or dirt left on the display may cause stains.
・
If the terminal is wiped with alcohol, paint thinner, benzine or detergent,
the printing may disappear or color may fade.
■
Clean the jack occasionally with a dry cotton swab etc.
If the jack is soiled, connection gets worse and it may cause power to be
turned off or insufficient battery charge, so clean the jack with a dry cotton
swab etc. Also, be careful never to damage the jack when cleaning it.
■
Do not place the terminal near an air-conditioner outlet.
The rapid change in temperature may cause condensation, causing internal
corrosion and malfunction.
■
When using, be careful not to subject excessive force to the terminal or
the battery.
If the terminal is crammed into a brimming bag or placed in a pocket and sat
on, display, internal PCBs or battery pack may be damaged or malfunction.
And, if external devices are plugged into the external connection jack, the
breakage of the connector or malfunction may result.
■
Do not rub or scrape the display with a metal piece etc.
May scratch the display, causing malfunction or damage.
7. Material list
Part
Material
Surface treatment
Exterior case (front)
PC resin
None
Power key
PC resin
None
Earpiece protection net
Stainless steel
Etching
Surface
Glass
None
Volume key
PC resin
None
Camera
Exterior panel
Aluminum
None
Lens
Glass
None
Flash cover
PMMA resin
None
Speaker net
Stainless steel
Etching
1Seg/
Mobacas
antenna
Top section
PC resin
None
Rod section
Stainless steel
None
Back cover
PC resin
None
Charging contacts for
desktop holder
Copper
Gold plating
Battery
pack
Surface (Top/
Bottom)
ABS resin + PC resin
None
Printed
section
(peripheral)
PET
UV coating
Contacts
FR-4 (glass epoxy
substrate)
Nickel p gold
plating
docomo mini UIM card
slot contacts
Stainless steel
Nickel p gold
plating
microSD card slot
Stainless steel
Nickel p gold
plating
General