162
International roaming
A network type in use appears on the status bar.
: Roaming
・
You can check the name of the connected network operator on the
Notification panel.
When "Automatic date & time"or "Automatic time zone" is marked, the
date, time and time differences of the terminal are corrected by receiving
information related to time and time differences from the network of
overseas telecommunications carrier you connect to.
・
Correction of the time or time differences may not be performed correctly
depending on the network of overseas network operator. In that case, set
time zone manually.
・
Timing of correction varies by the overseas network operator.
・
"Date & time" (P.110).
・
For loss or theft of the terminal or UIM/docomo mini UIM card, immediately
contact DOCOMO from the spot to take the necessary steps for suspending
the use. For inquiries, see the last page of this manual. Note that you are still
liable for the call and communication charge incurred after the loss or theft
occurred.
・
For using from land-line phone, entering "International call access code" or
"Universal number international prefix" for the country is needed.
Making settings for overseas use
By default, the terminal detects available network in the country you stay
and connects to it automatically. But you can set it manually.
To connect to network operator compatible with GSM network overseas,
change the network type.
1
From the Home screen,
M
→
"Settings"
2
"More..."
→
"Mobile networks"
→
"Network Mode"
3
Tap a network to use
・
LTE/3G/GSM (Auto): Select available network mode automatically.
・
LTE/3G: Use 3G network (LTE is not available overseas).
・
GSM: Use GSM/GPRS network.
Information
・
By default, "LTE/3G/GSM (Auto)" is set. You do not need to change the
settings for using the terminal in Japan and in a region with only 3G network
operators.
・
If the mode is set to [LTE/3G/GSM (Auto)] and a GSM/GPRS network and 3G
network of the same network operator are detected at the same time,
connection to a 3G network is given priority.
Display
Date & time
About inquiries
Setting network type