169
Appendix/Index
The operation time provided by the
battery pack is short
・
Is the terminal left for a long time out of service area? Out of service area, a lot of power is consumed to search
available radio waves.
・
The operation time provided by the battery pack varies by the operating environment and battery pack's
deterioration.
・
The battery pack is a consumable part. Each time it is charged, available time with each charging reduces. Even
the full charge state, when the operation time is too short, purchase a new battery pack of the specified type.
The docomo mini UIM card is not
recognized
・
Is the docomo mini UIM card installed in the right direction? (P.20)
No operation is performed when you
tap the touch panel/touch key or
press a key
・
Is the terminal in sleep mode? Cancel sleep mode by pressing
T
. (P.27)
The touch panel/touch key or key
reacts slowly when a screen is tapped
or a key is pressed.
・
When large amount of data is saved in the internal storage of the terminal or transferring large-size data between
the terminal and microSD card, the reactions on the screen may be delayed.
Time is incorrect.
・
It may occur if you keep the terminal turned on for a long time. Check if "Automatic date and time" (P.110) is set to
ON, and turn OFF and then ON the terminal in a places where signal is strong.
Terminal operation is unstable
・
It may be caused by applications installed to the terminal after purchase. If problems improve when you start in
Safe Mode, problems may be improved by uninstalling the applications.
*Safe Mode is a function to activate the phone in a mode similar to default.
・
To start Safe Mode
1. From the Settings menu, turn off "Fast boot" (P.111) and then turn off the terminal
2. Press
T
for 2 seconds or more with the power of the terminal OFF, and then press and hold
-
(Volume key)
from when the logo of "HUAWEI Ascend" appears until the terminal vibrates once
*When safe mode is booted, "Safe mode" is displayed at the lower left of the Home screen.
*To exit the safe mode, turn power OFF and then ON.
・
Back up the necessary data before using safe mode.
・
Some widgets that you created may be removed.
・
Safe mode is not usual active state. To use ordinarily, exit the safe mode.
Turning the power off or restarting
automatically happens
・
If the contacts of battery pack are dirty, the contact may become poor and the power may shut OFF. If they are dirty,
clean with a dry cotton swab.
Trouble
Check and remedy