25
Before using the terminal
<Example : Changing with AC adapter 03 (optional)>
1
Insert microUSB plug of microUSB cable into the
external connection jack of the terminal with USB
mark side down horizontally (
a
)
2
Insert a USB plug of a microUSB cable into the USB
connector of AC adapter jack horizontally as shown
(
b
)
3
Insert the AC adapter's power plug into an outlet (
c
)
Charging starts.
appears on the status bar. When charging is
complete,
appears on the status bar.
・
LED light turns on while charging. Light color indicates charging state
estimation. Red indicates 14% or less, yellow indicates 15 – 90%,
green indicates 90% or more remaining battery level.
4
When charging is complete, pull out the power plug of
the AC adapter main unit from the outlet
5
Pull out microUSB plug of the microUSB cable from
the external connection jack of the terminal
horizontally
6
Pull out USB plug of the microUSB cable from AC
adapter main unit horizontally
DC adapter is an adapter for connecting vehicle cigarette lighter socket
(12V/24V) and the terminal for charging. For details, refer to the manual of
DC adapter.
Information
・
If the DC adapter's fuse blows, replace it only with the specified fuse. Fuse is
a consumable part. Purchase it at an auto-supply shop etc. near you.
You can charge connecting the terminal and a PC with Micro USB Cable
01 (optional).
・
For procedure of connecting to a PC, see P.117.
Information
・
Charging is not available when a PC is power off except for some devices.
Charging with AC adapter
c
b
a
USB plug
External connection
jack
Power plug
USB connector
LED light
AC adapter 03 main unit
microUSB cable
microUSB plug
DC adapter (optional)
Charging with a PC