96
Settings
1
From the Home screen,
M
→
"Settings"
→
"More..."
2
"Tethering"
→
"Configure Wi-Fi hotspot"
3
Check network SSID and security (password)
・
Security type can be selected from "Open", "WPA PSK", and "WPA2
PSK".
・
Mark "Show password" to show entered password.
■
Changing network SSID and security (password)
a
Change network SSID and security (password)
→
"Save"
Information
・
Performing "Factory data reset" (P.109) initializes password.
Use Micro USB Cable 01 (optional) to connect the terminal and other
device. Make setting to connect other device to the Internet via packet
communication of the terminal.
・
For information on how to connect to the terminal and system requirement for
available PC, see "Connecting external device" (P.117).
・
Windows Vista PCs and Windows 7 PCs are available. For Windows XP PC,
download and install the latest version of Microsoft ActiveSync.
・
For details on USB tethering, from the Home screen,
M
→
"Settings"
→
"More..."
→
"Tethering"
→
"Help".
1
Connect the terminal and communication device with
Micro USB Cable 01
・
For information on how to connect, see "Connecting external device"
(P.117).
2
From the Home screen,
M
→
"Settings"
→
"More..."
3
"Tethering"
・
Make sure that notification indicating that USB is connected appears
under "USB tethering".
4
"USB tethering"
→
Confirm details of notes
→
"OK"
"USB tethering" is marked and
appears on the status bar.
■
Canceling USB tethering setting
a
Unmark "USB tethering"
b
Click USB safely remove on the task try of your PC.
c
Remove Micro USB Cable 01
Information
・
While USB tethering is set, inserted microSD card or internal storage of the
terminal cannot be used from a PC as a USB storage.
Connect Wi-Fi Direct device to exchange data.
1
From the Home screen,
M
→
"Settings"
→
"More..."
2
Mark "Wi-Fi direct"
appears on the status bar.
・
If confirmation screen for starting Wi-Fi Direct appears, check the note
→
Tap "OK".
3
"Wi-Fi Direct settings"
The Wi-Fi Direct setting screen appears. Scanned devices appear in the
"WI-FI DIRECT DEVICES" field.
4
Tap a device to connect
→
"Connect"
Using USB tethering
Using Wi-Fi Direct