23
6
Confirm that "OK" is displayed and click "
ファイル
(File)"
→
Click "
ハイパー
ターミナルの終了
(End HyperTerminal)".
7
When confirming disconnection, click "
はい
(Yes)"
→
When confirming saving,
click "
いいえ
(No)".
Setting Show/Hide caller ID
You can set to show/hide call ID for packet communication at once.
Caller ID is your important information. Take care when deciding to disclose your caller ID.
I
If "Not notify" is set when using mopera U or mopera, connection is unavailable.
<Example> Setting under Windows XP
1
Perform Step 1 - 4 in "Setting the dialup connection (APN)".
2
Enter notify/not notify of caller ID in the format "AT
*
DGPIR=<n>"
→
.
<n>
: 0-2
0
: Connect directly (Default)
1
: Connect prefixing 184 (Not notify)
2
: Connect prefixing 186 (Notify)
3
Confirm that "OK" is displayed and click "
ファイル
(File)"
→
Click "
ハイパー
ターミナルの終了
(End HyperTerminal)".
4
When confirming disconnection, click "
はい
(Yes)"
→
When confirming saving,
click "
いいえ
(No)".
Show/Hide caller ID function by dialup network settings
The dialup network settings can also be used to append 186 (Notify)/184 (Not notify) to the dialup
connection number.
I
The Show/Hide of caller ID when both of the
*
DGPIR command and dialup network settings are set is as
shown below.
・
If nothing is displayed even when AT command
is entered, enter ATE1 and press
.
Setting made by
*
DGPIR
Dialup network
command
setting (<cid>=3)
No setting
Caller ID is not sent.
Caller ID is sent.
*
99
***
3#
Caller ID is sent.
Caller ID is not sent.
Caller ID is sent.
184
*
99
***
3#
Caller ID is not sent.
186
*
99
***
3#
Caller ID is sent.