22
Ba
si
c O
p
e
ra
tio
n
✜
Attaching Battery Pack F13
With label side of the battery pack up, align convex parts of the battery
pack with concave parts of the display unit, slide the battery pack in
the direction of
a
and then press it in the direction of
b
to set in.
✜
Attaching Back Cover F45
Place the 4 tabs of back cover to the notches of the display unit, press
the back cover in the direction of
a
to avoid forming any clearance
between the display unit and the back cover, then slide it in the
direction of
b
to attach it.
Point
･
UIM (blue) is not available for this FOMA terminal. If you have the UIM
(blue), bring it to a docomo Shop.
Separate FOMA terminal and turn off the power of keypad unit,
and then perform properly with holding the keypad unit in hand.
✜
Removing Back Cover F46
Hold the keypad unit in one hand
not to slide and with pressing a
round mark of the back cover with
your thumb of the other hand, and
slide in the direction of the arrow
approximately 3 mm to remove it.
✜
Attaching Battery Pack F14
With label side of battery pack
up, align convex parts of the
battery pack with concave parts
of the keypad unit, slide the
battery pack in the direction of
a
and then press it in the
direction of
b
to set in.
✜
Attaching Back Cover F46
Place the 4 tabs of back cover to
the notches of the keypad unit,
press the back cover in the
direction of
a
to avoid forming
any clearance between the keypad
unit and the back cover, then slide
it in the direction of
b
to attach it.
Battery pack
Convex parts
Concave parts
Back cover
Attaching to keypad unit
Press here with
your thumb
Back cover
Battery pack
Convex parts
Concave parts
