Docomo F-05A Instruction Manual Download

Page: 396 / 405

AT+CMEE=<n>

Set whether to display an error report at FOMA terminal.
n=0 : Display "ERROR" and no result code (default)
n=1 : Use result code, displaying reason as number
n=2 : Use result code, displaying reason as alphabetic characters
Display reasons in the "+CME ERROR : xxxx" format when n=1 or n=2 is set (xxxx = number
or alphabetic characters).

→

P41 "Error messages list"

AT+CMEE? : Display current settings
AT+CMEE=? : Display a list of assignable values

AT+CMEE=0
OK

AT+CNUM

Display FOMA terminal's own phone number in the "+CNUM : ,"<number>",<type>" format.
number : Own phone number
type=129 : International access code + not included
type=145 : International access code + included

AT+CNUM
+CNUM : ,"090XXXXXXXX",
129
OK

AT+COPS=<n>,2,<oper>

Set search method for network operator to connect.
n=0 : Auto (default)

n=1 : Manual

n=3 : No mapping

When n=1 is set, set PLMN Number in hexadecimal value for <oper>.
AT+COPS? : Display current settings
AT+COPS=? : Display a list of assignable values

AT+COPS=0
OK

AT+CPAS

Display whether FOMA terminal can send and receive AT commands to external devices in
"+CPAS : <n>" format.
n=0 : Possible

n=1 : Impossible

n=2 : Status unknown

n=3 : Possible and receiving

n=4 : Possible and communicating

AT+CPAS=? : Display a list of displayable values

AT+CPAS
+CPAS : 0
OK

AT+CPIN="<pin>",
"<newpin>"

Enter these commands for entering PIN/PIN2 codes or PUK. To enter PUK, enter new PIN/
PIN2 code in <newpin>. Even if entering in <newpin> when entry of PIN/PIN2 code is
request, PIN/PIN2 code cannot be changed.
AT+CPIN? : Display the code currently requested in "+CPIN : <n>" format
n=READY : Entry of code not requested

n=SIM PIN : Entry of PIN code waited

n=SIM PIN2 : Entry of PIN2 code waited
n=SIM PUK : Entry of PUK waited due to failure in unblocking PIN code
n=SIM PUK2 : Entry of PUK waited due to failure in unblocking PIN2 code

AT+CPIN="0000"
OK

AT+CR=<n>

Set whether to display the communication type before "CONNECT" is displayed during
connection.
n=0 : Not display (default)
n=1 : Display the communication type in the "+CR : <serv>" format
serv=GPRS : Packet communication

serv=SYNC : 64K data communication

serv=AV64K : 64K videophone
AT+CR? : Display current settings

AT+CR=? : Display a list of assignable values

AT+CR=0
OK

AT+CRC=<n>

Set whether to use +CRING result codes when communication is received.
n=0 : Not use (default)
n=1 : Use "+CRING : <type>" result codes
type=GPRS "PPP",,,"<APN>" : Packet communication
type=SYNC : 64K data communication

type=AV64K : 64K videophone

AT+CRC? : Display current settings
AT+CRC=? : Display a list of assignable values

AT+CRC=0
OK

AT+CREG=<n>

Set whether to display network information indicating Within service area or Out of service
area.
n=0 : Not notified (default)
n=1 : When the terminal is moved from Within service area to Out of service area or vice

versa, the status is reported in the "+CREG : <stat>" format.

stat=0 : Out of service area

stat=1 : Within service area

stat=4 : Unknown

AT+CREG? : Display the current settings and status in the "+CREG : <n>,<stat>" format
AT+CREG=? : Display a list of assignable values

AT+CREG=0
OK

AT+CUSD=<n>,"<str>"

Inquiry and set for Additional service (Register USSD) of Network Services. Enter Service
code provided by DOCOMO in <str>.
n=0 : Not answer mid result (default)
n=1 : Answer mid result in "+CUSD : <m>, "<str>",0" format
m=0 : Information not requested

Docomo F-05A, Instruction Manual

Search results

Summary of Contents for F-05A

Reviews:

Related manuals for F-05A

Brands by name

Popular brands