35
■
Communication protocol result code
■
Display example of result code
When ATX0 is set
Regardless of the settings of AT
¥
V command, only "CONNECT" is displayed upon completion of
connection.
Text display example : ATD
*
99
***
1#
CONNECT
Number display example : ATD
*
99
***
1#
1
When ATX1 is set
・
When ATX1, AT
¥
V0 (default) is set
Upon completion of connection, the result code is displayed in the following format : "CONNECT <speed
between FOMA terminal - PC>".
Text display example : ATD
*
99
***
1#
CONNECT 460800
Number display example : ATD
*
99
***
1#
1 21
・
When ATX1, AT
¥
V1 is set
*1
The code is displayed upon completion of connection in the following format.
"CONNECT<speed between FOMA terminal - PC><Communication protocol><dialup connection (APN)>/
<upstream maximum speed (between FOMA terminal
→
radio base station)>/<downstream maximum
speed (between FOMA terminal
←
radio base station)>"
*2
Text display example : ATD
*
99
***
1#
CONNECT 460800 PACKET mopera.ne.jp/384/7232
(Indicates the terminal is connected to mopera.ne.jp providing a maximum upload speed of 384kbps and
a maximum download speed of 7,232kbps.
)
Number display example : ATD
*
99
***
1#
1 21 5
*1
When ATX1 and AT
¥
V1 are set at the same time, it is likely that dialup connection will fail. It is recommended that
only AT
¥
V0 be used.
*2
When AT
¥
V1 is set, <dialup connection (APN)> and the following are displayed only when packet is used for
connection.
No.
Text display
Meaning
1
PPPoverUD
Connect via 64K data communication (BC=UDI, +CBST=116,1,0)
3
AV64K
Connect via 64K videophone
5
PACKET
Connect via packet communication