6
Connecting up PC to the FOMA terminal
Connecting/disconnecting to PC is explained here. Installing FOMA communication
configuration file (driver) is described separately.
→
P7
･
If you connect FOMA terminal to a PC before installing FOMA communication configuration file (driver),
Windows may automatically detect that USB cable has been inserted, and may request the driver. In such
a case, click "
キャンセル
(Cancel)" on the displayed screen to end.
･
The connection should be made with a PC and FOMA terminal both turned ON.
･
Location of external connection jack or connecting/disconnecting to a USB cable may vary depending on
the model. Refer to "Instruction manual (detailed version) (in Japanese only)" (in pdf format) of your
FOMA terminal.
◆
Inserting USB cable
1
Insert the connector of the USB cable into FOMA terminal's external
connection jack.
2
Insert the other end of the USB cable connector into the PC USB port.
･
When a PC and FOMA terminal are connected, appears on the stand-by display of FOMA
terminal.
❖
Removing USB cable
1
Press the USB cable's release buttons on both sides of the connector and
remove the connector from FOMA terminal.
2
Remove the USB cable out from the PC.
✔
INFORMATION
･
Be careful not to give excessive force to the connecter of the USB cable when connecting/disconnecting the cable
to/from FOMA terminal.
When disconnecting the connector, be sure to pull it straight while pressing the release button. Applying an
excessive force to disconnect the connector may give damage to it.
･
Do not remove the USB cable during data communication. The data communication is disconnected and it may
cause data loss or malfunction.
