103
Sound/Screen/Light Settings
INFORMATION
●
When
Normal use
of
Display light time
is set to other than
Always
, if you do not press any keys for about 90
seconds, the display disappears and the FOMA terminal
goes into a power saving mode. If there is any key
operation*
1
(except rotating the Speed Selector) or an
incoming call, the display reappears. However, the
FOMA terminal does not go into a power saving mode in
the following cases:
･
During a videophone call
･
When the shooting/recording screen of the camera is
displayed or during shooting
･
While viewing 1Seg or playing video
･
While charging with
AC adapter connected
of
Display
light time
set to
Always on
･
While executing the function with
Display light time
set
to
Always on
*1 Even if
k
is pressed, the display does not
appear. In addition, except for during a call, a
number, etc. is not entered even when pressing
keys.
●
Even if
i-
α
ppli
is set to
Terminal setting
, the setting may
not be applied for some i-
α
ppli.
●
Even if the light of the keys or the display is set to be
swithed automatically, it does not operate normally and
flickering may occur in the following cases:
･
When the light sensor is scratched or foreign material
is attached to the sensor
･
When the light sensor is covered or is in the shadow
･
When ambient luminance is not stable
･
When the direction of the light sensor changes
suddenly to light source such as lighting equipment or
sunlight
●
Even if the light of the keys or the display is set to be
swithed automatically, it may not operate normally
because the brightness cannot be detected correctly
depending on the light source.
●
Setting the display light during 1Seg viewing
●
The settings of this function are reflected to the settings
of Display Light for i-mode (
P146), Recording Setting (
P146), Settings for
i-motion (
P284) and Display Light for i-
α
ppli (
In addition, the setting for i-motion is also reflected to the
setting for the display light of Music&Video Channel.
Changing the display color
Color Scheme
The color of each part of the screen such as the
background or characters is changed.
1
m
z
Settings & NW services
z
23
1
z
Highlight the color
z
o
･
You can select a color from 24 colors.The color
names are for information purpose only.
Setting the menu to display
Startup Menu Setting
You can select the menu displayed by pressing
m
on
the standby display from the Kisekae menu, the basic
menu and the custom menu.
･
Custom Menu
1
m
z
Settings & NW services
z
22
1
z
1
-
3
■
Basic menu design set by default
INFORMATION
●
On the menu screen:
m
z
Select startup menu
Changing the design of the basic menu
Icons and a background image of the basic menu can
be changed.
･
The icons are enlarged/reduced to 192 x 192 and the
background image is enlarged/reduced to 480 x 704
depending on the size of image to set.
When the simple menu of Kisekae tool is set
●
The menu numbers differ. Menu list of the simple
menu
●
During calling or talking, you can see how to adjust the
volume of other party’s voice.
●
Enter a phone number to see the operation to be
performed subsequently.
●
On the standby display, enter a phonebook No. (1 to
9) to see the registered name and phone number. Key
operations for making a voice call/videophone call are
also shown. During a voice call, you can also press
m
, select
Dial up
and enter a phonebook number to
see the same information.
Next
▲
Summary of Contents for FOMA D905I
