manualshive.com logo in svg

Docomo FOMA D905I, Manual

The Docomo FOMA D905I user manual is available for download for free on 88.208.23.73:8080. This manual provides detailed instructions on how to use the features of this sleek and advanced smartphone, allowing users to fully maximize its capabilities. Get your manual today and take full advantage of your device.

Share
Download
background image

12

Easy Search/Contents/Precautions

SAFETY PRECAUTIONS (Always follow these 
directions)

●

Read the following SAFETY PRECAUTIONS to 
ensure that the phone is used correctly. Also, store 
this manual in a convenient location for future 
reference.

●

It is essential that these precautions be observed to 
prevent injury to the user and third parties as well as 
damage to property.

●

The following symbols are used to indicate the 
degree of danger or damage that may result from 
failing to follow the specified precautions.

 

●

The following symbols are used to highlight 
instructions that are very important and that must 
be strictly followed.

 

●

SAFETY PRECAUTIONS is separated into 6 
categories.

 

Handling the FOMA terminal, battery pack, adapter 

(and charger) and the UIM (general information)

........................................................................ P12

Handling the FOMA terminal .............................. P13

Handling the battery pack ................................... P15
Handling optional devices (AC adapter/DC adapter/

Desktop Holder/In-Car Holder) ....................... P16

Handling the UIM (FOMA card) .......................... P16
Handling the FOMA terminal in the vicinity of 

medical devices .............................................. P17

Handling the FOMA terminal, battery pack, adapter 
(and charger) and the UIM (general information)

Indicates an imminently hazardous situation, which, if not 
avoided, will result in death or serious injury.

Indicates a potentially hazardous situation, which, if not 
avoided, could result in death or serious injury.

Indicates a potentially hazardous situation, which, if not 
avoided, may result in injury or property damage.

This indicates the action is prohibited.

This indicates disassembly is prohibited.

This indicates that handling with wet hands 
is prohibited.

This indicates the part must not be exposed 
to water.

This indicates the action must be 
performed in accordance with the 
directions.

This indicates you must remove the plug 
from the power outlet.

DANGER

WARNING

CAUTION

Do not use, store or leave in a high-
temperature place such as near fire, in 
direct sunlight or in a sun-heated car.

Otherwise, the equipment will get deformed or 
troubled. The battery pack may leak, overheat, 
rupture or ignite, and a reduction in performance 
and life may result.
Sometimes, the casing will partly get heated, 
resulting in an extremely high temperature to 
get you burnt.

Do not attempt to disassemble or 
remodel. In addition, do not attempt to 
solder.

Attempting to do so will lead to an accident, 
such as a fire, injury or electric shock and 
damage the equipment.
Doing so may also cause the battery pack to 
leak, overheat, rupture or ignite.

Do not expose to water.

The equipment may overheat, cause electric 
shock, fire, damage or injury if exposed to 
water, pet urine or other liquids. Do not use the 
equipment in locations where it could get wet.

Use only DoCoMo-certified battery 
packs and adapters (and chargers) 
with the FOMA terminal.

Use of non-specified items could cause the FOMA 
terminal, battery pack and other devices to leak, 
overheat, rupture, catch fire or malfunction.
Battery Pack D10
Desktop Holder D15
FOMA AC Adapter 01/02
FOMA DC Adapter 01/02
FOMA Dry Battery Adapter 01
FOMA Portable Charging Adapter 01
FOMA USB Cable with Charge Function 01
FOMA AC Adapter 01 for Global use

･

For additional items related to the compatible 
products, contact the nearest DoCoMo Shop.

Do not place the battery pack, FOMA 
terminal, adapter (and charger) or UIM 
in the microwave oven, high-pressure 
cooker or other cooking appliances.

Doing so could cause the battery pack to leak, 
overheat, rupture or ignite, and could damage 
the circuitry of the FOMA terminal and adapter 
(and charger), causing overheat, smoke or fire.

DANGER

WARNING

Summary of Contents for FOMA D905I


































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FOMA D905I

Warner Telecom Group Aspire Quick Reference Manual preview
Aspire
Brand: Warner Telecom Group Pages: 4
Olitech EasyFlip OLT2908 User Manual preview
EasyFlip OLT2908
Brand: Olitech Pages: 57
Yealink CP935W Quick Start Manual preview
CP935W
Brand: Yealink Pages: 8
Yealink T48G Manual preview
T48G
Brand: Yealink Pages: 38
Yealink W56P Telesystem Quick Start Manual preview
W56P Telesystem
Brand: Yealink Pages: 12
Yealink Verizon One Talk W60B Quick Reference Manual preview
Verizon One Talk W60B
Brand: Yealink Pages: 8
Yealink Telkom W52P Specification preview
Telkom W52P
Brand: Yealink Pages: 2
Yealink T46S Skype for Business Handling Instruction preview
T46S Skype for Business
Brand: Yealink Pages: 2
Yealink VP59 Teams Administrator'S Manual preview
VP59 Teams
Brand: Yealink Pages: 533
Unify OpenStage M3 Plus User Manual preview
OpenStage M3 Plus
Brand: Unify Pages: 89
Talkswitch TS-550i User Manual preview
TS-550i
Brand: Talkswitch Pages: 83
NTT docomo L600i User Manual preview
L600i
Brand: NTT docomo Pages: 68
Trium TRIUM GALAXY User Manual preview
TRIUM GALAXY
Brand: Trium Pages: 74
Allview P5 Pro Software Update Procedure preview
P5 Pro
Brand: Allview Pages: 7
Icemobile TROPICAL III User Manual preview
TROPICAL III
Brand: Icemobile Pages: 20
Matrix SPARSH VP710 User Manual preview
SPARSH VP710
Brand: Matrix Pages: 1046
Grandstream Networks GXP1450 Quick Start Manual preview
GXP1450
Brand: Grandstream Networks Pages: 19
EMPORIA TALKcomfort Manual preview
TALKcomfort
Brand: EMPORIA Pages: 2

Brands by name

Popular brands

Load more brands