manualshive.com logo in svg

Docomo FOMA D905I, Manual

The Docomo FOMA D905I user manual is available for download for free on 88.208.23.73:8080. This manual provides detailed instructions on how to use the features of this sleek and advanced smartphone, allowing users to fully maximize its capabilities. Get your manual today and take full advantage of your device.

Share
Download
background image

426

Appendix/External Devices/Troubleshooting

Data transmission is 
frequent. Continue 
transmission?

Displayed in case the number of 
transmission is extremely large within 
the specified duration when using 
i-

α

ppli. Select 

Yes

 to use i-

α

ppli 

successively, 

No

 to continue i-

α

ppli 

after terminating i-

α

ppli transmission 

or 

Terminate i-

α

ppli

 to quit i-

α

ppli.

Delete software and IC card 
data?

Among the i-

α

ppli to delete, there is 

Osaifu-Keitai compatible i-

α

ppli of 

which the data within IC card are 
also deleted by deleting the i-

α

ppli. 

Select 

Yes

 to delete the i-

α

ppli and 

the data in IC card.

Dial callout restricted.

This prohibited operation is 
unavailable with Keypad Dial Lock 
on. 

Download failed.

Communication was interrupted 
during reception. Please move to 
another location with good radio 
reception and retry. However, in 
case the data contains an error, 
it cannot be downloaded even 
though you retry. Contact the 
provider of the data.

Error in IC card data. Unable 
to delete software. 

Osaifu-Keitai compatible i-

α

ppli 

containing errors within IC card data 
cannot be deleted. 

Error in image.
Does not work correctly.

Flash movie cannot be displayed 
because of the error in the image data.

Error in memory. Unable to 
read/write PushTalk phone 
book. Quit.

Unable to read or write the PushTalk 
phonebook because the memory 
space for the FOMA terminal 
phonebook and PushTalk 
phonebook contains error.
Activating the FOMA terminal 
phonebook restores the memory 
space. 

Error in ToruCa data. Unable 
to save.

The data of ToruCa is incorrect.

Exceeds maximum number 
member.

PushTalk calls were made for above 
4 members. Select members up to 4 
persons.

Exceeds maximum size. 
Unable to display.

The contents of the attached file 
beyond the maximum size cannot be 
displayed.

Exceeds maximum size. 
Unable to play.

The attached file beyond the 
maximum size cannot be played.

Failed to clear call cost 
information.

The UIM is not correctly installed or 
the card is faulty. 

☛

P32

Failed to read call cost 
information.

The UIM is not correctly installed or 
there is a fault. 

☛

P32

Failed to switch to data 
transfer mode.

FOMA terminal is in data 
communication. Processing could not 
be performed because switching to 
data transfer mode was unavailable. 
Terminate the communication or retry 
the operation later.

File contains multiple data 
file. Unable to display.

The contents of the attached file 
containing multiple data cannot be 
displayed.

FM transmitter is currently 
unavailable for use.

FM Transmitter cannot be used in 
countries overseas. In addition, also 
in Japan, it cannot be used outside 
the service area in case of turning 
the power newly.

Folder is full.

Unable to receive Message R/F 
because the memory space is 
insufficient. Please read unread 
Message R/F, release protection or 
delete unnecessary Message R/F.

i-

α

ppli stand-by display 

canceled due to security 
error.

i-

α

ppli standby display has exited 

due to unpermitted operation.

iC transmission
Connection interrupted

Error has occurred during iC 
communication. Keep overlapping 
the FeliCa marks during sending.

iC transmission
Failed to connect via 
authentication.

Sending all data was failed because 
the authentication password is not 
correct. Enter the same 
authentication password between 
the sender and receiver.

iC transmission
No response. Retry data 
exchange?

The specified time has elapsed with 
no response from starting iC 
communication. Select 

Yes

 and 

overlap the FeliCa marks.

iC transmission
No UIM. Unable to start 
requested software.

Even when i-

α

ppli To is set in the 

data received by iC communication, 
starting is unavailable due to UIM 
operation restriction. 

☛

P33.

iC transmission
Unable to switch to data 
transfer mode.

FOMA terminal is in data 
communication. Processing cannot 
be performed because switching to 
data transfer mode is unavailable. 
Terminate the communication or 
retry the operation later.

Inbox full. Unable to retrieve 
new messages.

Unable to receive SMS because of 
insufficient storage space in the Inbox 
of the FOMA terminal or UIM. Please 
read unread mail, release mail 
protection or delete unnecessary mail.

Inbox is full.

Unable to receive i-mode Mail 
because there is insufficient memory 
space in the Inbox. Please read 
unread i-mode Mail, release 
protection or delete.

Infrared 
Connection interrupted.

An error occurred during infrared 
communication. During infrared 
communications, do not move the 
FOMA terminal pointed at the other 
terminal’s infrared data port before 
data sending and receiving is 
complete. 

☛

P309

Summary of Contents for FOMA D905I


































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FOMA D905I

Samsung galaxy S9 Quick Reference Manual preview
galaxy S9
Brand: Samsung Pages: 23
Samsung GALAXY S8 ACTIVE Let'S Get Started preview
GALAXY S8 ACTIVE
Brand: Samsung Pages: 12
Samsung Galaxy S5 Sport Get Started preview
Galaxy S5 Sport
Brand: Samsung Pages: 30
Samsung GALAXY S5 Assembly Manual preview
GALAXY S5
Brand: Samsung Pages: 23
Samsung GALAXY S5 Important Information Manual preview
GALAXY S5
Brand: Samsung Pages: 58
Samsung Galaxy S22 Quick Start Manual preview
Galaxy S22
Brand: Samsung Pages: 2
Samsung Galaxy S21 FE Quick Start Manual preview
Galaxy S21 FE
Brand: Samsung Pages: 18
Samsung Galaxy S21+5G Notes Of Usage preview
Galaxy S21+5G
Brand: Samsung Pages: 80
Samsung Galaxy S Vibrant User Manual preview
Galaxy S Vibrant
Brand: Samsung Pages: 193
Samsung GALAXY SII Get Started preview
GALAXY SII
Brand: Samsung Pages: 44
Samsung Galaxy S8 Manual preview
Galaxy S8
Brand: Samsung Pages: 12
Samsung Galaxy S8 Quick Start Manual preview
Galaxy S8
Brand: Samsung Pages: 40
Samsung Galaxy S7 Repair Manual preview
Galaxy S7
Brand: Samsung Pages: 22
Samsung Galaxy S4 Customer Consultant Manual preview
Galaxy S4
Brand: Samsung Pages: 114
Samsung Galaxy S4 Get To Know preview
Galaxy S4
Brand: Samsung Pages: 4
Samsung Galaxy S6 edge Quick Start Manual preview
Galaxy S6 edge
Brand: Samsung Pages: 14
Samsung Galaxy S4 Quick Reference Manual preview
Galaxy S4
Brand: Samsung Pages: 20
Samsung Galaxy S4 Start Manual preview
Galaxy S4
Brand: Samsung Pages: 39

Brands by name

Popular brands

Load more brands