433
Appendix/External Devices/Troubleshooting
INFORMATION
●
Never remove the battery pack while updating software.
Updating may fail.
●
Software update can be done while various data, such as
the phonebook/PushTalk phonebook entries registered
in the FOMA Terminal, camera images, downloaded
data are retained; however, note that data protection
sometimes cannot be secured depending on the
conditions of your FOMA terminal (such as malfunction,
damage, or water leak). DoCoMo recommends backing
up necessary data. However, note that some data such as
downloaded data may not be backed up.
･
Software cannot be updated in the following cases:
･
At the time of updating software, the unique
information of your FOMA terminal (model or serial
number, etc.) will be automatically sent to the server
(the server for updating software managed by
DoCoMo). DoCoMo will not use the sent information
for any other purpose than software update.
･
Software update (downloading or rewriting) may take
time.
･
If software update is executed when
ON
is set for
PIN1 Code On/Off, the PIN code entry screen is not
displayed at the time of automatic reload after
completion of software updating.
･
While software is being updated, making/receiving
calls, various communication functions or other
functions are not available (Incoming voice calls can
be answered while downloading).
･
Any incoming videophone call cannot be answered
during download. Unanswered calls are recorded as
missed ones in the received call history.
･
Even if an alarm clock or any alarm is set while
software is being updated, the updating continues
without activating the alarm clock or the alarm.
･
For software update, SSL session is established to
the server (our site). Enable SSL certificate in
Manage Certificate. Configured as valid by default.
･
Software update should be done with battery fully
charged and enough battery power (
).
･
It is recommended that software update be executed
when good signal quality is obtained, 3 bars of the
antenna icon (
) are displayed and the terminal is
not being moved.
･
If radio wave signals become weaker during
software downloading or downloading has stopped,
retry software update in a place with strong radio
wave signals.
･
A displayed icon for the message stored at i-mode
Center disappears after software update.
If Receive Option Setting is set to
ON
and mail
arrives during software updating, the screen that
notifies an arrival of mail in the i-mode Center may
not appear after the software update being
completed.
･
When software update has failed, the message
Rewrite failed
appears and all the operations are
unavailable. In such a case, please bring the FOMA
terminal to a repair office designated by DoCoMo.
･
Software update is unavailable when using the
terminal overseas.
･
In case updating is not required, when checking the
necessity of software update, a message is displayed
indicating update is not necessary, so use as it is.
･
Software update is available even if Host Selection is
set to other than i-mode.
Updating software automatically
Auto-update
New software is downloaded automatically and the
rewriting is performed at specified time.
■
Setting Auto-update
1
m
z
Settings & NW services
z
74
2
Enter the terminal security code
z
Set auto-
update
Auto-update Setting screen appears.
3
Set auto-update
field
z
1
Usage precautions
･
While executing other functions
･
When the date and time are not set
･
When the UIM is not inserted
･
When the battery is not fully charged
･
When PIN1 code is being entered
･
When PIN1 code is locked
･
When
圏外
is indicated
･
The power is off
･
In Self Mode on
･
While talking
･
During Omakase Lock (Remote Lock)
･
During packet communication connecting with a
PC
･
During 64K data communication
Auto-update
Setting screen
Next
▲
Summary of Contents for FOMA D905I
