125
Security Settings
Rejecting/accepting incoming calls from the
specified phone numbers
Reject/Accept Call
Reject/Accept Call is set for each phone number
registered in the FOMA terminal phonebook, the
setting is enabled by Reject/Accept Call. However,
Reject Call and Accept Call cannot be enabled at the
same time.
･
Combination with Caller ID Request Service and
Anonymous Caller is recommended when used.
･
This function is also available for incoming PushTalk
calls.
Accepting only the incoming calls from the
specified phone numbers
1
Search the phonebook
z
Highlight a party
z
m353
2
Enter the terminal security code
z
Highlight a
phone number
z
o
3
1
Accept Call is set for the phone number.
･
To cancel:
3
･
To set to multiple phone numbers, repeat Step 1
to 3. Entry of the terminal security code is
required only when you operate again from the
standby display.
4
m
on the standby display
z
Settings & NW
services
z
551
z
Enter the current
terminal security code
5
3
The setting of Accept Call for each phone number
is enabled and only incoming calls from all the
phone numbers with Accept Call set are accepted.
･
To cancel:
1
Rejecting the incoming calls from the specified
phone numbers
Even if there is an incoming call or PushTalk call from
the set phone number, the call is disconnected without
activating the ring alert and the caller hears busy tones.
For the PushTalk call,
Connection failed
. appears on the
caller’s screen. In case of the PushTalk call with 3 or
more parties, the connected members are notified that
you are not connected.
1
Search the phonebook
z
Highlight a party
z
m353
2
Enter the terminal security code
z
Highlight a
phone number
z
o
3
2
Reject Call is set for the phone number.
･
To cancel:
3
･
To set to multiple phone numbers, repeat Step 1
to 3. Entry of the terminal security code is
required only when you operate again from the
standby display.
4
m
on the standby display
z
Settings & NW
services
z
551
z
Enter the current
terminal security code
5
2
The setting of Reject Call for each phone number
is enabled and all the incoming calls from the
phone numbers with Reject Call set are rejected.
･
To cancel:
1
INFORMATION
●
This function is activated only when the other party
notifies the caller ID. If a call with no caller ID is received
from a party that you set Reject Call to, the FOMA
terminal operates according to Anonymous Caller
regardless of the setting for Reject/Accept Call.
●
The rejected calls are recorded as missed calls in the
received call history.
●
If the ringing time is set to 0 seconds for Voice Mail
Service or Call Forwarding Service, Voice Mail Service or
Call Forwarding Service is activated and the call is not
recorded in the received call history.
●
If the phone number with Reject/Accept Call set is
changed or deleted, the setting is canceled. In that case,
set Reject/Accept Call for the phone number changed or
registered again.
●
If
Accept call
is selected in Reject/Accept Call in case
there is no phonebook data for which
Accept call
is set, a
message appears. If
Yes
is selected, all the incoming
calls are rejected.
●
i-mode Mail or SMS is received regardless of the setting
of this function.
●
If Accept call or Reject Call is set to the phonebook data,
is indicated on the upper part of the details screen of
the phonebook data.
Setting the incoming operation when the
phone number is not notified
Anonymous Caller
The operation for an incoming voice call with no caller
ID can be set for each reason for no caller ID.
･
For the ring alert and incoming image in case there is
an incoming voice call without caller ID, the setting of
this function is given priority over the setting of Call
Alert.
Next
▲
Summary of Contents for FOMA D905I
