145
Camera
You can set the following image size:
*1 These sizes are unavailable during shooting with the
in-camera.
*2 This size cannot be set when Codec type is set to
H.264(HQImage)
.
a
: Images can be sent as an i-mode mail attachment.
In addition, these sizes are suitable for attaching to
Deco-mail.
b
: Images can be sent as an i-mode mail attachment.
A confirmation screen appears asking whether to
convert the size to QVGA when attaching the files
to the mail.
c
: Images can be sent as an i-mode mail attachment.
･
Default image size
･
Still image (
OUT camera
): Standby (480 x 864)
Still image (
IN camera
): CIF (352 x 288)
･
Movie (
OUT camera/IN camera
): QCIF (176 x 144)
･
The maximum size of an image or movie file that can
be sent to the i-mode terminal is up to 2 Mbytes.
･
Depending on the receiver’s model, the file may not
be received or displayed properly, or movie may be
degraded or displayed as continuous images.
･
If you send a movie file to devices other than the
below*
1
, use the image size of QCIF (176 x 144).
*1 903i series, 904i series, 905i series, 703i series
(except P703i
μ
) and 704i series (except
P704i
μ)
･
The setting for size restrictions may be changed
automatically depending on the setting for the image
size.
･
While i-
α
ppli is running or being set as the i-
α
ppli
standby display, the image size cannot be set to
UXGA (1200 x 1600), Full HD (1920 x 1080) and 3M
(1536 x 2048). Even if any of these image sizes is
set, the image size is automatically changed to SXGA
(960 x 1280) when the still image shooting screen is
displayed while i-
α
ppli is running.
･
The image size cannot be set to QVGA (320 x 240)
or VGA (640 x 480) when Compatible Mode is set to
ON
.
Flicker adjustment
If you set the flicker adjustment according to the power
supply frequency of the area of use when the screen
flickers under a fluorescent light etc., the flicker may be
reduced.
･
Adjustment might fail to remove flickers if there is
strong light from fluorescent or other lamps.
1
m23
on the still image shooting
screen or the movie recording screen
z
1
-
3
INFORMATION
●
This setting also applies to the flicker adjustment setting
for the videophone and Bar Code Reader.
●
If you use the shake reduction function with the flicker
adjustment being set to
Auto
, flickering may not be
adjusted sufficiently. It is recommended that you change
the flicker adjustment setting according to the local
power supply frequency.
Optimizing the movie setting for various devices
Compatible Mode
This function optimizes the recorded movie to be sent
to devices other than the below*
1
.
*1 903i series, 904i series, 905i series, 703i series
(except P703i
μ
) and 704i series (except P704i
μ)
･
If you set
ON
, the size restriction, the image size and
Codec type are changed to
Msg attach:
Small
, QCIF
(176 x 144) and
MPEG4
, respectively. Also the
quality is changed to
HQ
only when it was set to
XQ(Extra high)
.
1
m7
on the movie recording screen
･
Each time you press these keys, the Compatible
Mode switches between
ON
and
OFF
.
Image size
Shooting
method
Icon
Image size
Remarks
Still
Camera
Ph. Book (96 x 72)
a
Sub-QCIF (128 x 96)
QCIF (176 x 144)
QVGA (240 x 320)
CIF (352 x 288)
b
H-VGA (640 x 480)*
1
V-VGA (480 x 640)*
1
Standby (480 x 864)*
1
SXGA (960 x 1280)*
1
UXGA (1200 x 1600)*
1
Full HD (1920 x 1080)*
1
3M (1536 x 2048)*
1
Movie
Camera
Sub-QCIF (128 x 96)*
2
c
QCIF (176 x 144)
QVGA (320 x 240)
VGA (640 x 480)*
1
Auto
：
Adjusts to reduce the flicker automatically (the
default is
Auto
).
50Hz (East-Japan)
：
Adjusts according to the power supply wave
frequency of Eastern Japan.
60Hz (West-Japan)
：
Adjusts according to the power supply wave
frequency of Western Japan.
Next
▲
Summary of Contents for FOMA D905I
