203
Area Mail (planned to provide)
Area Mail allows you to receive earthquake emergency
alerts delivered from Japan Meteorological Agency or
other alerts.
･
Area mail can be received even if i-mode is not
subscribed.
･
The setting for receiving is required to receive Area
mail.
･
Area mail cannot be received during Omakase Lock,
international roaming or Self Mode, while connecting
to the Data Center, or updating software. In addition,
Area mail may not be received in the following cases.
The Area mail which failed to be received cannot be
received again.
･
During a voice call
･
During a videophone call
･
During a PushTalk call
･
During i-mode communication
･
During data communication
There are two types of Area mails as follows:
Earthquake emergency alerts:
The received information are notified by buzzer
(dedicated alarm sound and vibrator). Even if
Silent Mode is on, the vibrator is operated
regardless of the setting for Silent Mode.
･
The sound volume of buzzer cannot be adjusted,
but the sound of buzzer (dedicated alarm sound
and vibrator) (
P203) and the ring time
(
P204) can be set.
･
The operation of vibrator follows the setting for
incoming mails. However, even if
OFF
is set, the
vibrator operates by
Pattern A
.
Other alerts:
When the information is received, the dedicated
ring alert for Area mail is sounded.
･
The sound volume follows the setting for
Mail/
Msg alert vol
, and the ring time follows the setting
for the mail ring alert.
･
The setting for Silent Mode is applied in Silent
Mode.
When Area mail is received
･
When Area mail is received,
is indicated and the
Area mail view screen or the message
Received Area
appears. Which is displayed is set by the
distributor.
･
The received Area mail is saved to the
Inbox
folder of
Inbox
.
･
The maximum number of items that can be saved
INFORMATION
●
If you press
o
,
c
or
f
, the Area mail view screen
disappears.
●
Received Area Mail
appears for about 15 seconds if you
do not press any key, or until the buzzer or mail ring alert
stops if ring time is set to 15 seconds or longer in Beep
Time of Area Mail Setting or Mail Alert.
●
When the number of Area mails in the
Inbox
folder
exceeds 30 items, the oldest one is deleted regardless of
free space of the
Inbox
folder.
Setting Area Mail
Area Mail Setting
Setting to receive Area mail
Receive Setting
･
NO
is set by default. When
YES
is set, Area mail is
received.
1
a821
z
YES
or
NO
Registering Message ID of Area mail
Receive Entry
Register the name of Area mail and Message ID of
information you want to receive other than emergency
information. When you receive the emergency
information, registration for receiving is not needed.
1
a822
2
p
z
Enter the terminal security code
･
To edit the registered information: Highlight the
registered information
z
o
z
Enter the
terminal security code
･
To delete the registered information: Highlight
the registered information
z
m2
z
Enter
the terminal security code
z
Yes
3
Set each item
z
p
Setting the buzzer of Area Mail
Beep Setting
Set whether to play the buzzer when Area mail for
which buzzer plays is received.
1
a823
z
1
or
2
･
If
Always OFF
is set, the dedicated ring alert for
Area mail sounds.
Example
Adding area information
Area Mail name
：
Up to 15 one-byte or two-byte characters can be
entered.
Message ID
：
Enter the 4-digit ID.
Summary of Contents for FOMA D905I
