207
■
Selecting from the sent message log of SMS:
Sent msg log
z
Highlight a log
z
o
･
The phone number of the address of SMS is
set.
■
Selecting from the received message log of
SMS:
Received msg log
z
Highlight a log
z
o
･
The phone number of the sender of SMS is
set.
3
z
Enter the message
･
When the font type is set to
Japanese
in SMS
Setting, up to 70 one-byte or two-byte characters
can be entered. A space is also counted as a
character in the message.
･
When the font type is set to
English
in SMS
Setting, up to 160 one-byte characters can be
entered. Alphanumerics and symbols (except for
｀｡｢｣､･ﾞ
and
ﾟ
) can be sent. A one-byte space is
counted as a character in the message.
･
Press
#
to enter a line feed (except for the
one-byte/two-byte numeric modes). A line feed is
counted as a character in the message.
However, it is replaced by a space depending on
the receiver’s terminal.
■
Inserting a signature:
m45
4
p
■
Saving without sending:
m2
INFORMATION
●
Depending on signal conditions, the type of characters to
be sent or the other party’s terminal, characters may not
be displayed correctly at the receiver side.
●
Even if
Not notify
is set in Caller ID Notification, the caller
ID is sent to the receiver when SMS is sent.
●
If you enter some symbols (
｜＾{ } [ ] ˜
and
￥
) when the
font type is English, the number of characters that can be
sent is reduced. In this case, you may not be able to
send the message even if the number of characters is
less than the limit.
●
When the memory is not enough, or the maximum
number of saved items is exceeded, SMS cannot be
composed. Delete unnecessary i-mode Mail and SMS
from
Unsent messages
●
Even when SMS has been sent, a model incompatible
with SMS reception cannot receive SMS normally.
●
SMS cannot be sent by Number B of 2in1.
●
The font type and whether to receive the delivered report
must be set in SMS Setting beforehand. You can also
change the settings for the delivered report and storage
period while composing SMS.
●
When transmission is completed correctly, SMS is saved
in the folder of
Outbox
. When the memory is not enough,
or the maximum number of saved items is exceeded, the
oldest sent mail is deleted. Be sure to protect sent mail
you want to keep.
●
When transmission fails, an error message appears and
SMS is saved in the
Unsent
folder of
Unsent messages
.
You can edit and send the SMS from the
Unsent
folder.
●
When you set the delivered report to
Request
and send
SMS, you will receive a delivered report that notifies you
that the message has been received by the other party’s
FOMA terminal. The delivered report is saved in
Inbox
.
When SMS is received
Receive SMS
･
The maximum number of items that can be saved
1
An SMS message is received
･
You can stop reception by pressing
f
while
receiving SMS, but SMS may be received
depending on the situation.
2
o
or
1
z
Highlight a folder
z
o
z
Highlight an SMS message
z
o
･
You can reply to (
P182) or forward (
the received SMS.
Flashing
: Unread SMS exists.
: Unread SMS and
i-mode Mail exist.
Number of received SMS
When reception fails, “
×
” is
indicated after
Messages
.
Reception completed (The reception
result screen appears, the mail ring
alert sounds and the Enter key lights/
flashes.)
Reception result ticker
Receiving screen
Reception result screen
Next
▲
Summary of Contents for FOMA D905I
