214
i-
α
ppli
INFORMATION
●
In case of partially saved i-
α
ppli, you can only download
the remaining data, display the detail information, delete
or move to another folder.
●
For IC card data transferred by the iC transfer service,
you can only download or delete the corresponding
Osaifu-Keitai compatible i-
α
ppli.
●
i-
α
ppli operation may be interrupted when a call arrives
or the alarm sounds. When the function being used ends,
i-
α
ppli is resumed. However, some i-
α
ppli applications
may not return to the state before interruption when
resumed.
If Osaifu-Keitai compatible i-
α
ppli is interrupted, the
read/write operation of data from/to the IC card is also
interrupted. In that case, the data being read or written
may be discarded.
●
Some i-
α
ppli and i-
α
ppli DX applications cannot be used
in Privacy Mode.
●
When you are outside the service area or cannot use the
saved data, some i-
α
ppli applications may not start or
operate correctly.
●
Images used by i-
α
ppli or the data you entered may be
sent to the server via Internet. Images used by i-
α
ppli
are those shot with the camera activated by the i-
α
ppli
application, those obtained through the infrared/iC
communication function of the i-
α
ppli application, etc.
●
Depending on i-
α
ppli applications, the IP can access the
i-
α
ppli application saved in the mobile phone and directly
stop its use. This disables the i-
α
ppli to be started,
upgraded, or set for the standby display. You can only
delete it or view its detail information. To use it again,
contact the IP to release suspension of i-
α
ppli.
●
The IP may send data to i-
α
ppli applications saved in the
mobile phone.
●
When the IP requests to stop/restart i-
α
ppli or send data
to i-
α
ppli, the FOMA terminal performs communication
and
blinks. In this case, the communication charge is
not required.
●
Depending on the software, you can save data in the
microSD memory card. Show the detail information to
check whether to use the microSD memory card. The data
saved in the microSD memory card may not be used on
other FOMA models.
●
Do not cover In-camera with your hand while playing a
download Virtual game. It may prevent from detecting the
tilt.
●
The sound volume for i-
α
ppli operation can be set by
i-
α
ppli
effect sound
. However, sound may not be heard
depending on the i-
α
ppli application.
●
To i-
α
ppli creators
If i-
α
ppli being created does not operate normally, the
trace information may help. Note that trace information
cannot be displayed unless an i-
α
ppli application created
to record trace information is saved.
･
To display the trace information:
m
z
i-
α
ppli
z
34
･
To delete the trace information:
p
z
Yes
Displaying the security error history
When i-
α
ppli ended because of an error such that
i-
α
ppli cannot use the saved data, the name of i-
α
ppli,
date and time, and cause of the security error are
recorded.
･
Up to 20 items are recorded. When the number
exceeds 20, the oldest record is deleted.
1
m
z
i-
α
ppli
z
33
■
Deleting a record:
p
on the history display
screen
z
Yes
Viewing detail information
You can check the detail information such as the name
and version of i-
α
ppli.
1
d
(for over a second)
z
Highlight a folder
z
o
z
Highlight an i-
α
ppli
z
p
･
The displayed items differ depending on the
i-
α
ppli application.
･
For i-
α
ppli downloaded from SSL pages, you can
check the site certificate by pressing
p
on the
software detail information screen.
Setting preferences
Settings
･
Items that can be set depend on the i-
α
ppli
application.
･
In the dual mode or the B mode of 2in1, you cannot
set
Set
i-
α
ppli
display
and
Set NW transmission during
i-
α
ppli
display
.
1
d
(for over a second)
z
Highlight a folder
z
o
2
Highlight an i-
α
ppli
z
m6
z
Set each
item
z
p
*1 Only these icons are displayed in the IC card software
list.
Speed selector
：
Set rotary selector functions of the Speed
Selector to be used during operation of i-
α
ppli.
Up and down
: The same operation as with
%
Right and left
: The same operation as with
&
･
The above settings are unavailable when
Speed selector
of the Speed Selector Setting is
set to
OFF
.
FM transmitter
：
Set whether to transmit the i-
α
ppli sound
through FM Transmitter.
･
For details about FM Transmitter
Power save mode
：
Set whether to stop the running i-
α
ppli
application when the display disappears.
Set i-
α
ppli display
：
Set whether to set the i-
α
ppli application for the
standby display.
･
Only one i-
α
ppli application can be set.
Summary of Contents for FOMA D905I
