247
GPS Function
■
When the
Repeat
setting is
Every day
or
Day of week
and the
Date
setting is
Specify start/end
If you set the end time as a value which is the same
as, or earlier than, the start time, the setting is
enabled until the end time of the day following the
end day.
INFORMATION
●
If
Always permit
or
Permission period
is set for Request
Permit/Deny, the location information may be sent
without operating the FOMA terminal and notified to the
searcher.
●
If you set
Always permit
or
Permission period
,
(black)
appears on the standby screen. If
permission period
excludes
Date
setting,
(gray) appears.
●
When Request Permit/Deny is set to
Always deny
, a
location request is denied without alerting its arrival by
display, sound, vibrator or lighting. The location request
is not recorded in the location log as a failed one.
Setting the connection destination for GPS
Service Setting
Service Host URL
You can set the connection destination for GPS
Service Setting.
1
m
z
LifeKit
z
764
2
Host
field
z
User setting
･
To return to the DoCoMo connection setting:
Host
field
z
DoCoMo
z
p
3
User host
field
z
Enter the host (up to 99 one-
byte alphanumeric characters)
4
User host URL
field
z
Enter the URL (up to 100
one-byte alphanumeric characters)
z
p
Performing GPS Service Setting
GPS Service Setting
Connect to the site for GPS Service Setting and
perform service usage settings such as the search
permission and password for the Location Request
function.
･
If you try to access a GPS Service Setting site from
an overseas country which supports international
roaming, connection to the site is made via packet
communication. However, an error screen appears
and you are charged with a packet communication
fee for this failed connection.
1
m
z
LifeKit
z
763
You are connected to the site for GPS Service
Setting.
2
Perform a setting
･
For the setting procedure, contact the GPS
service provider.
Notifying the current location information
Notify Location
The current location is determined and the location
information is sent to the party registered in advance.
･
This is a function that sends the current location of
the FOMA terminal to the service provider associated
with the Notify Location function.
･
Use of this function will be charged.
･
To use this function, sometimes you have to make an
application to the service provider in advance. Note
that you may be required to pay for the service.
Example
When the current time is 10:00 on Wednesday,
January 23, 2008 and when the
Repeat
setting
is
Day of week
(from Monday through Friday)
and the
Date
setting is
None
Example setup
Period permitted
Start time End time
09:00
18:00
Starting now, 9:00 to 18:00
everyday from Monday through
Friday
09:00
09:00
Starting now, 24 hours everyday
from Monday through Friday (9:00
on each day from Monday through
Friday to 9:00 next day)
17:00
06:00
Starting at 17:00 this day, 17:00 to
6:00 next day from Monday
through Friday
Example
When the current date is Wednesday,
January 23, 2008 at 10:00 and the
Repeat
setting is
Every day
Example setup
Period permitted
Start
time
End
time
Start
date
End
date
09:00
18:00
2008/
01/23
2008/
01/30
From now to 18:00
on January 30 (9:00
to 18:00 everyday)
09:00
09:00
2008/
01/23
2008/
01/30
From now to 9:00 on
January 31 (9:00 on
any day to 9:00 next
day)
17:00
06:00
2008/
01/23
2008/
01/30
Starting at 17:00 this
day, 17:00 to 6:00
next day, everyday
up until 6:00 on
January 31
Note: Usually, you do not need to change this setting.
Next
▲
Summary of Contents for FOMA D905I
