manualshive.com logo in svg

Docomo FOMA D905I, Manual

The Docomo FOMA D905I user manual is available for download for free on 88.208.23.73:8080. This manual provides detailed instructions on how to use the features of this sleek and advanced smartphone, allowing users to fully maximize its capabilities. Get your manual today and take full advantage of your device.

Share
Download
background image

326

Music&Video Channel/ Music Playback

Saving WMA files

Use a PC to download or obtain WMA files from 

Internet websites or CDs and save them in the 

microSD memory card. Windows Media Player is 

required to obtain and save WMA files.

･

The maximum number of items that can be saved 

☛

P294

･

To transfer WMA files, use the following version of 

Windows Media Player on either Windows XP 

Service Pack 2 or Windows Vista.

･

For Windows XP Service Pack 2: 

Windows Media Player 10 (Version 10.00.00.3802 

or later) or Windows Media Player 11 (Version 

11.0.5721.5145 or later)

･

For Windows Vista: 

Windows Media Player 11 (Version 11.0.6000.6324 

or later)

･

Before connecting your PC to the FOMA terminal, be 

sure to check the version of Windows Media Player.

･

The FOMA USB Cable with Charge Function 01 

(optional) is required for connecting the FOMA 

terminal to PC.

･

You can transfer a playlist from your PC to the FOMA 

terminal. Up to 400 WMA files per playlist can be 

transferred.

･

WMA files cannot be saved in the FOMA terminal.

1

Save WMA files in a PC using Windows Media 
Player

･

For details about Windows Media Player, refer to 
Help of Windows Media Player 10 or 11.

2

Switch the USB mode setting of the FOMA 
terminal to the MTP mode

･

For details about USB mode setting 

☛

P301

･

Insert the microSD memory card and change the 
mode to the MTP mode.

■

Switching the mode while Music Player is 
active: 

m

 on the folder list screen or music 

data list screen of Music Player 

z

 

MTP mode

 

z

 

Yes

 

The MTP mode is set and Music Player 
terminates.

･

This function is unavailable during playback.

3

Activate Windows Media Player

4

Connect the FOMA terminal to a PC with the 
FOMA USB Cable with Charge Function 01

･

To connect a PC to the FOMA terminal 

☛

P302

5

Transfer WMA files from the PC to the microSD 
memory card of the FOMA terminal using 
Windows Media Player

6

Disconnect the cable after completion of 
transfer

･

To remove the cable 

☛

P302

INFORMATION

●

It is recommended that Windows XP, Windows Vista and 
Windows Media Player be updated to the latest versions. 
Without the latest versions, some problems may occur 
such as slow operation or display of the transferred WMA 
files.

●

WMA files transferred to the microSD memory card by 
another FOMA terminal may not be displayed or played 
on D905i.

●

If you use a microSD memory card that WMA files are 
transferred to using another FOMA terminal, the PC may 
not recognize it even if you change the mode to the MTP 
mode. In that case, delete all the WMA files (

☛

P332) or 

format the microSD memory card (

☛

P300). Note that all 

the data including the music data is deleted if you format  
the microSD card.

●

Music Player in D905i does not support AAC format files 
that can be played by Music Player in D902iS or earlier 
models of FOMA D Series. However, such files can be 
played on D905i if they are saved in the 

Other movie

 

folder of Data Box in the microSD memory card. For 
saving data in the microSD memory card 

☛

P304

Napster

®

 application

You can use the Napster

®

 application to save music files.

●

Download the Napster

®

 application from the website 

shown below. You can also access the website from 
the supplied CD-ROM. 
http://www.napster.jp/

●

If you have any questions about the Napster

®

 

application, refer to the following web page. 
http://www.napster.jp/support/

Summary of Contents for FOMA D905I


































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FOMA D905I

Neoi 136 User Manual preview
136
Brand: Neoi Pages: 50
Haier V280 User Manual preview
V280
Brand: Haier Pages: 49
NEC Univerge SV 9500 Reference Sheet preview
Univerge SV 9500
Brand: NEC Pages: 2
Aastra Dialog 4422 IP Office User Manual preview
Dialog 4422 IP Office
Brand: Aastra Pages: 151
Aastra Dialog 4422 Quick Reference Manual preview
Dialog 4422
Brand: Aastra Pages: 2
Aastra Dialog 4420 IP Basic User Manual preview
Dialog 4420 IP Basic
Brand: Aastra Pages: 74
Aastra DBC 425 Directions For Use Manual preview
DBC 425
Brand: Aastra Pages: 101
Aastra Clearspan 6739i Admin Manual preview
Clearspan 6739i
Brand: Aastra Pages: 9
Aastra Clearspan 6739i Reference Manual preview
Clearspan 6739i
Brand: Aastra Pages: 8
Aastra Clearspan 6739i Release Note preview
Clearspan 6739i
Brand: Aastra Pages: 20
Aastra 7444ip Quick Reference Manual preview
7444ip
Brand: Aastra Pages: 104
Aastra 7433ip User Manual preview
7433ip
Brand: Aastra Pages: 108
Aastra Clearspan 6731i Quick Reference Manual preview
Clearspan 6731i
Brand: Aastra Pages: 2
Aastra VentureIP 480i Admin Manual preview
VentureIP 480i
Brand: Aastra Pages: 7
Aastra 9143i Series Administrator'S Manual preview
9143i Series
Brand: Aastra Pages: 1140
Aastra VentureIP 480i Administrator'S Manual preview
VentureIP 480i
Brand: Aastra Pages: 174
Aastra 6730I Administrator'S Manual preview
6730I
Brand: Aastra Pages: 888
Aastra Dialog 5446 IP Premium User Manual preview
Dialog 5446 IP Premium
Brand: Aastra Pages: 87

Brands by name

Popular brands

Load more brands