55
Voice/Videophone Calls
1
m
z
Settings & NW services
z
57
2
z
1
-
3
End the call
: Ends the call.
Continue
: Continues the call.
On hold
: Puts the call on hold.
INFORMATION
●
When you close the FOMA terminal during a call using
the Flat-plug Earphone/Microphone with Switch
(optional) or a handsfree device (available in market), the
call continues regardless of this setting if the setting is
made to play sounds from the connected device. Even if
you remove the Flat-plug Earphone/Microphone with
Switch (optional) or handsfree device with the FOMA
terminal closed, the call will continue.
●
When you close the FOMA terminal while recording a
message, the recording continues regardless of this
setting.
●
This setting applies when you close the FOMA terminal
while recording a talking voice memo or movie memo.
When
End the call
or
On hold
is set, the data recorded up
to the point when the call is ended or held are saved.
Adjusting the volume of the other party’s
voice during a call
Listen Volume
･
The volume of the other party’s voice can be adjusted
from level 1 (lowest volume) to level 6 (highest
volume).
･
The volume changed while talking is retained even
after the call is ended or the power is turned off.
1
%
during a call
z
O
to adjust the volume
The volume is set automatically by pressing
o
or
waiting for a while after you stop key operations.
･
To turn up the volume:
u
or
r
･
To turn down the volume:
d
or
l
･
To adjust the volume during a videophone call:
%
INFORMATION
●
For adjusting the earpiece volume in standby and for
sound settings affected by Listen Volume
Adjusting the volume of ring alerts while
receiving a call
Ring Alert Volume
･
The volume can be adjusted in 7 levels, from
Silent
to
level 1 to level 6 (the volume of Movie ringtone can
also be adjusted in 7 levels).
･
The ring volume changed while receiving a call is
reset to the original volume when a call or PushTalk
is ended.
1
%
while receiving a call
z
O
to adjust the
volume
The volume is set automatically by pressing
o
or
waiting for a while after you stop key operations.
･
To turn up the volume:
u
or
r
･
To turn down the volume:
d
or
l
INFORMATION
●
To stop the ring alert and vibrator:
C
while receiving a
call
●
While receiving a call, the ring volume cannot be set to
Steptone
(the volume changes in the order of
Silent
→
level 1
→
...
→
level 6 about every 3 seconds).
●
For adjusting the ring alert volume in standby and for
sound settings affected by Ring Alert Volume
Setting the priority screen for incoming calls during a
call or packet communication
Priority Comm Mode
Set the priority of the screen to be displayed when you
receive a packet communication through a connected
PC during a voice call or you receive a voice call during
i-mode.
･
When an i-mode mail or Message R/F is received
during a voice call, the voice call talking screen
appears by priority regardless of this setting.
･
The screen switching caused by this function does
not interrupt the call or packet communication.
･
When a voice call is received while viewing a data
broadcasting website, the incoming voice call screen
appears by priority regardless of this setting.
1
m
z
Settings & NW services
z
56
1
z
1
-
3
No Set Up
: Displays the screen for the latest
incoming call or communication without setting the
priority.
Voice call
: Displays the voice call talking screen by
priority.
Packet
: Displays the packet communication screen
during a voice call, and the i-mode communication
screen during i-mode.
Summary of Contents for FOMA D905I
