64
Voice/Videophone Calls
Changing the videophone settings
Videophone Settings
Set the operation to be performed when a videophone
call is not connected, the screen to be displayed during
a videophone call, etc.
・
The setting of
Auto redial as voice
ensures access to
the other party. By setting this function to
ON
, a
dialed videophone call will be automatically redialed
as voice call if the other party’s terminal does not
support the videophone function or cannot receive
the videophone call while using the mova service
through Dual Network Service. Redialing may not
occur, however, if you call an ISDN synchronized
64K or PIAFS access point, or an ISDN videophone
incompatible with 3G-324M (as of October 2007), or
if you dial the wrong number. Note that some calls
may require the call charge.
1
m
z
Settings & NW services
z
61
3
z
Set each item
z
p
INFORMATION
●
Even when
Auto redial as voice
is set to
ON
, redialing may
not be performed depending on the situation of the other
party or the network.
●
When
Auto redial as voice
is set to
ON
, if you make a
videophone call during a packet communication with a
PC connected, the call is redialed as voice call without
connecting to the videophone. During a voice call or 64K
data communication, the call is not connected to the
videophone and redialing is not performed, either.
●
If redialing as voice call occurs with
Auto redial as voice
set to
ON
, voice call charges apply instead of digital
communication charges.
●
When you talk by videophone while the Flat-plug
Earphone/Microphone with Switch (optional) is
connected, the voice sounds from the connected
earphone/microphone regardless of the setting of
Speakerphone
.
●
If a videophone call is made to emergency numbers
(110, 119 or 118) from the FOMA terminal when
Auto
redial as voice
is set to
ON
, the call is automatically
switched to a voice call.
Setting the substitute and on-hold images
Videophone Image Setting
Change the images to be sent to the other party during
a videophone call such as the substitute image, answer
machine image, response hold image, on-hold image
and movie memo image.
・
You cannot set the following images:
・
Still image with a size larger than 176 x 144
・
Still image in the format other than JPEG and GIF
・
Animation and created animation
・
Image not permitted to output from the FOMA
terminal
1
m
z
Settings & NW services
z
61
5
z
1
2
Image
field
z
1
z
p
Auto redial as voice
:
Sets whether to redial as voice call automatically
when a videophone call is not connected.
Display setting
:
Specifies whether to display either your self
image or the other party’s image or both images.
Sub screen
:
Specifies whether to display your self image or
the other party’s image on the sub screen.
Screen size
:
Sets the main screen view size.
Visual preference
:
Sets the quality of image sent from the other
party.
Display light
:
Sets the display light during a videophone call.
Terminal settings
: Follows the setting of
Display
light time
(
Normal use
) in Display Light Setting
Speakerphone
:
Specifies whether to turn on the speakerphone
once a videophone call is connected.
Setting the substitute image
Example
Setting the default Chara-den
Default Chara-den
(Boy) is
set.
Chara-den
Summary of Contents for FOMA D905I
