manualshive.com logo in svg

Docomo Foma SH905i, Manual

The Docomo Foma SH905i user manual is available for free download on our website. This manual provides detailed instructions on how to utilize the features of this innovative mobile phone. Simply visit 88.208.23.73:8080 to access this essential guide and make the most of your device.

Share
Download
background image

488

e23_dv50_7e.fm

Ap
pe
nd
ix

/Ex
te

rn

al De
vic
es/
Tr

ou
bl

es

ho
oti
n

g

[Content length exceeds 
maximum size for 
i-motion]

 

Appears when the file of Standard type i-motion that can be 
split-downloaded or Streaming type i-motion exceeds 10 MB and 
cannot be downloaded.

P. 201

[Content length exceeds 
replayable size for 
i-motion]

 

Appears when Standard type i-motion file exceeds 500 KB and cannot 
be downloaded.

P. 201

[Continue using i-

a

ppli 

and transmit data?]

 

When [No] is selected for [Data transmission is frequent. Continue 
transmission?], this message appears when i-

a

ppli once again 

attempts transmission.

 

To transmit and continue use of i-

a

ppli, select [Yes]. To not transmit 

and continue use of i-

a

ppli, select [No]. Select [Terminate]

 

to end 

i-

a

ppli.

P. 250

–

[Data in IC card is full. 
Unable to download. 
Delete service?]

 

Appears when space of IC card is not enough to download 
Osaifu-Keitai compatible i-

a

ppli. Select [Yes] to display the already 

registered Osaifu-Keitai compatible i-

a

ppli list and the capacity (bytes) 

in the IC card. After checking how much capacity is lacking, select 
services to be deleted and start i-

a

ppli to delete them. Depending on 

the Osaifu-Keitai compatible i-

a

ppli, however, only the Osaifu-Keitai 

compatible i-

a

ppli list appears after selecting [Yes]. In this case, select 

i-

a

ppli to be deleted from the list.

–

[Data transmission is 
frequent. Continue 
transmission?]

 

Appears when data transmission is noticeably frequent during i-

a

ppli 

use.

 

To transmit and continue use of i-

a

ppli, select [Yes]. To not transmit 

and continue use of i-

a

ppli, select [No]. Select [Terminate] to end 

i-

a

ppli.

P. 250

–

[Download canceled]

 

Appears when downloading is canceled during download.

–

[Download failed]
[Invalid content Download 
failed]

 

Appears when there is no data to download, or the data is invalid. 
Downloading is not possible.

 

Downloading is not possible due to invalid data or unsupported format.

–

–

[Duplicate address 
deleted]

 

A duplicate address is deleted when the same mail address is set as 
address or broadcast for i-mode mail.

P. 210

[Folder is full]

 

If i-mode mail is received when there is no available space in memory 
and no unprotected read mail, [Folder is full] appears. [0] appears for 
the number of messages in receive complete screen.

–

[Handset memory is full. 
Unable to receive 
anymore] or 
[UIM is full. Unable to 
receive anymore]

 

Appears when FOMA terminal handset and FOMA card memory are 
full. SMS cannot be received. Check the unread i-mode mail/SMS 
(

n

P. 218, P. 244), disable the protect (

n

P. 230), and delete the 

unnecessary i-mode mail/SMS (

n

P. 230, P. 246) on FOMA terminal 

handset and FOMA card.

–

[“i-

a

ppli To” function is not 

set]

 

Appears when attempting to start software, unauthorized to be linked, 
from a site, Internet web page, Message R/F, or i-mode mail. The 
software could not be started.

P. 258

[Input error (205)]

 

Appears when server is about to reset contents after sending text 
entered in a site or Internet web page.
All text and settings entered on screen are deleted (Contents sent 
before the error message appeared has already been sent).

–

[Invalid data. Connection 
cannot be established 
(400)]

 

Connection cannot be established due to errors in sites/Internet web 
pages. Check whether the URL is correct.

P. 184
P. 304

[Invalid UIM. download/
Upgrade/start failed or 
Invalid UIM. Unable to 
save]

 

Appears when the information of an inserted FOMA card (UIM) is 
different from that mapped to FeliCa.

–

Message

Explanation

Page

dv50_e.book  488 ページ  ２００７年１０月２９日　月曜日　午前１０時３８分

Summary of Contents for Foma SH905i



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Foma SH905i

NEC DT430 Series Quick Reference Card preview
DT430 Series
Brand: NEC Pages: 2
Lancom VP-100 Manual preview
VP-100
Brand: Lancom Pages: 50
Yealink SIP-T38G Reference Manual preview
SIP-T38G
Brand: Yealink Pages: 2
Yealink SIP-T32G Quick Installation Manual preview
SIP-T32G
Brand: Yealink Pages: 2
Yealink SIP-T29G Quick Reference User Manual preview
SIP-T29G
Brand: Yealink Pages: 2
Yealink SIP-T23G Quick Reference User Manual preview
SIP-T23G
Brand: Yealink Pages: 2
Yealink Yealink SIP-T28P Setup Manual preview
Yealink SIP-T28P
Brand: Yealink Pages: 10
Yealink Yealink SIP-T28P Quick Install preview
Yealink SIP-T28P
Brand: Yealink Pages: 2
Yealink SIP-T21 E2 Quick Installation Manual preview
SIP-T21 E2
Brand: Yealink Pages: 4
Yealink Yealink SIP-T28P Quick User Manual preview
Yealink SIP-T28P
Brand: Yealink Pages: 2
Yealink Yealink SIP-T28P Quick Reference Manual preview
Yealink SIP-T28P
Brand: Yealink Pages: 4
Yealink SIP-T2XP Auto Provisioning Manual preview
SIP-T2XP
Brand: Yealink Pages: 158
Yealink One Talk W78B Quick Start Manual preview
One Talk W78B
Brand: Yealink Pages: 6
Yealink T41P Skype Quick User Manual preview
T41P Skype
Brand: Yealink Pages: 4
Yealink MP54 Quick Installation Manual preview
MP54
Brand: Yealink Pages: 16
Yealink MP58 User Manual preview
MP58
Brand: Yealink Pages: 73
Yealink SIP VP-T49G Developer'S Manual preview
SIP VP-T49G
Brand: Yealink Pages: 120
Yealink SIP-T38G Quick Reference preview
SIP-T38G
Brand: Yealink Pages: 2

Brands by name

Popular brands

Load more brands