Settings
106
1
From the Home screen,
→
[Settings]
→
[Display & Wallpaper]
2
Mark [Shake to unrotate].
3
Shake the terminal twice immediately after the
screen direction is changed
The orientation of the screen is restored,
appears on
the status bar.
・
When
is displayed, the screen orientation is locked.
When you rotate your terminal to the original
orientation,
disappears in about 3 seconds and the
orientation lock is canceled.
✔
INFORMATION
・
The screen view may not be changed depending on the
strength, speed or angle of shaking the terminal.
◆
Touch and go display
Tap the screen to set to cancel/set sleep mode.
1
From the Home screen,
→
[Settings]
→
[Display & Wallpaper]
→
[Touch and go display]
2
Set [Touch and go display] to ON
3
Set required items
Adjust touch area:
Set the area where the Touch and go
display function is available.
Touch and sleep :
Tap the notification display on the lock
screen or notification panel to set to make the terminal
sleep mode.
✔
INFORMATION
・
When the glove touch function (
→
P130) is set to ON, the
touch and go display function is not available with hands in
gloves.
・
When the "Display method for notification" (
→
P116) setting
is set to "Don't show notifications at all", the Use Touch and
sleep for notification function is not available on the lock
screen.
◆
Screen timeout
❖
Sleep
Set time until the screen turns off.
1
From the Home screen,
→
[Settings]
→
[Display & Wallpaper]
→
[Screen timeout]
2
[Sleep]
→
Select time
❖
Keep lit when held
Set whether to keep the screen backlight on while the terminal
is in motion, held in hand.
1
From the Home screen,
→
[Settings]
→
[Display & Wallpaper]
→
[Screen timeout]
2
Mark/Unmark [Keep lit when held]