International roaming
149
❖
Setting Network operators
By default, the terminal is set to automatically search and
switch to an available network. To switch network manually,
perform the following operations.
1
From the Home screen,
→
[Settings]
→
[Data
communication/Airplane mode]
→
[Cellular
networks]
→
[Network operators]
Available networks are searched for and displayed.
･
If an error occurs in network search, turn [Data enabled]
to OFF and retry.
→
P112
2
Select a network of the network operator
✔
INFORMATION
･
If you have set a overseas specific network operator in the
country you visited, set the mode to [Choose automatically]
after returning to Japan.
❖
Setting Network Mode
1
From the Home screen,
→
[Settings]
→
[Data
communication/Airplane mode]
→
[Cellular
networks]
→
[Network Mode]
2
[LTE/3G/GSM (Auto)]/[LTE/3G]/[3G/GSM]/
[3G]/[GSM]
✔
INFORMATION
･
If the mode was set to [GSM] in the country you visited, set
the mode to [LTE/3G/GSM(Auto)] after returning to Japan.
❖
Date & time
When you have set [Automatic date & time]/[Automatic time
zone] in [Date & time] to ON, the date, time and time
differences of the terminal are corrected by receiving
information related to time and time differences from the
network of overseas telecommunications carrier you connect
to.
･
Correction of the time or time differences may not be
performed correctly depending on the network of overseas
network operator. In that case, set time zone manually.
･
Timing of correction varies by the overseas network
operator.
･
"Date & time"
→
P135
❖
About inquiries
･
For loss or theft of the terminal or docomo nano UIM card,
immediately contact DOCOMO from the spot to take the
necessary steps for suspending the use. For inquiries, see
the last page of this manual. Note that you are still liable for
the call and communication charge incurred after the loss or
theft occurred.
･
For using from land-line phone, entering "International call
access code" or "Universal number international prefix" for
the country is needed.
