Contents/Precautions
15
・
Do not place the terminal near an air-conditioner outlet.
- The rapid change in temperature may cause condensation,
causing internal corrosion and malfunction.
・
When using, be careful not to subject excessive force to the
terminal.
- If the terminal is crammed into a brimming bag or placed
in a pocket and sat on, display or internal PCBs may be
damaged or malfunction. And, if external devices are
plugged into the external connection jack or the stereo
earphone jack, the breakage or malfunction may result.
・
Do not rub or scrape the display with a metal piece etc.
- May scratch the display, causing malfunction or damage.
・
Read the instruction manuals supplied with individual
optional devices.
◆
The terminal
・
Do not press the surface of the touch panel strongly or
operate it with sharp objects such as a nail, a ballpoint pen
and a pin.
- It may damage the touch panel.
・
Avoid extreme temperature.
- Use the terminal where the temperature ranges between 5
and 40
℃
(limited to the temporary use in a bathroom etc.
when temperature is above 36
℃
) and humidity ranges
between 45 and 85%.
・
The terminal may affect land-line phones, TVs or radios in
use nearby, so use it as far as possible from these
appliances.
・
Maintain a separate record of the data you saved in the
terminal.
- If the data is deleted, DOCOMO assumes no responsibility
for the loss of any data.
・
Do not drop the terminal or subject it to shocks.
- May cause malfunction or damage.
・
Do not plug external devices into the external connection
jack or stereo earphone jack at a slant, or do not pull it
forcibly while it is plugged.
- May cause malfunction or damage.
・
It is normal for the terminal to become warm during use or
charging. Continue to use it.
・
Do not leave the terminal with the camera in areas under
strong direct sunlight.
- May cause discoloring or burn-in of elements.
・
Use the terminal with the external connection jack/slot cap
closed.
- Dust and/or water brought into the terminal cause
malfunction.
・
Do not give strong force to the fingerprint sensor or scratch
the surface of it.
- May cause damage to the fingerprint sensor or cause the
terminal to be unavailable to perform the authentication.
・
Clean the fingerprint sensor with a dry soft cloth (such as a
cloth for eyeglasses).
- May cause the fingerprint sensor to be unable to read
fingerprints and cause deterioration of the authentication
performance or malfunction if the sensor is dirty or the
surface of it is wet.
・
While microSD card is being used, do not take the card out
or do not turn off the terminal.
- May cause data loss or malfunction.
・
Do not bring magnetic cards etc. close to the terminal.
- Magnetic data in cash cards, credit cards, telephone cards,
floppy disks, etc. may be erased.
