Applications
81
・
Powering on the terminal is not necessary, but if the terminal
remains powered off for a long time or battery is low, the
function may not be available.
・
For non-subscriber to sp-mode, a part of Osaifu-Keitai service
may not be available.
◆
Using "
かざしてリンク対応サービス
(Kazashite-Link compatible service)"
1
From the Home screen,
→
[Settings]
→
[Useful
tools]
→
[NFC/Osaifu-Keitai Settings]
・
When the password setting screen for NFC/Osaifu-
Keitai lock appears, follow the onscreen instructions to
set password.
・
If [Lock NFC/Osaifu-Keitai] is marked, unmark the
checkbox.
2
Mark [Reader/Writer, P2P]
3
Hold
mark over a device equipped an NFC
module, a smart poster, etc.
・
In addition, you can exchange information between
terminals using Android Beam.
→
P143
◆
Notes when holding over the other
device
Pay attention to the following when holding the terminal over
a card reader, NFC module equipped device, etc.
・
Bring
mark close to the device slowly, do not hit it
strongly.
・
Hold
mark horizontally over the center of the compatible
device. If scanning fails even with it held in front of the
center of the scanner, slightly lift up the terminal, or move it
backwards/forwards or to the left/right.
→
P80
・
If there are metal objects between
mark and the other
device, scanning may fail. Putting the terminal into a case or
cover may affect communication. In that case, remove the
case or cover.
◆
Locking Osaifu-Keitai function
Lock the Osaifu-Keitai function not to allow others to use
Osaifu-Keitai services or acquire data from scanners.
・
Osaifu-Keitai lock is different from screen lock
authentication or SIM card lock.
1
From the Home screen,
→
[Osaifu-Keitai]
2
[Lock Settings]
・
When the password setting screen for NFC/Osaifu-
Keitai lock appears, follow the onscreen instructions to
set password.