178
Appendix/Index
Precautions
Never modify the FOMA terminal or
accessories.
• Doing so may result in fire, injuries or
malfunctions.
• The modified FOMA terminal may be
repaired only if the owner agrees on
that all the modified parts are restored
to the original conditions. However,
repairs may be refused depending on
the modifications.
The following cases may be considered as
modifications.
• Put a sticker on portions such as of
the display or keys.
• Glued decorations on the FOMA
terminal using adhesion bond, etc.
• Change the parts such as exterior to
other than DOCOMO standard parts.
• Malfunction and damage due to
modifications will be repaired at the
owner's expense, even if the warranty
period is still effective.
The model plate must not be removed
from the FOMA terminal.
The model plate certifies that the FOMA
terminal satisfies technical standards.
It should be noted that if the plate is
removed or is replaced with a different
plate, and the original model plate
cannot be verified, it may disqualify the
unit from repairs due to not being able to
determine the technical standards of that
particular phone.
Note that the settings and other
information may be reset (cleared) as a
result of malfunction, repair or other
handling of the FOMA terminal. In this
case, make the settings again.
When the repair is executed, MAC
address of Wi-Fi/Bluetooth address in the
terminal may be changed regardless of
repaired part.
Magnetic components are used in the
parts of the FOMA terminal that are
described below. Do not allow cash cards
or other devices that are vulnerable to
magnetism to come into contact with the
phone.
Parts where magnetic components are
used: camera, volume key, around
earpiece/speaker
