Handling precautions
General Notes
Do not allow the devices to become wet.
The FOMA terminal, battery pack, adapter and the
UIM (FOMA card) are not waterproof. Do not use
them in humid locations such as bathrooms, and
avoid exposing them to rain. If you carry the FOMA
terminal close to your skin, sweat may cause internal
components to corrode and result in malfunction.
The FOMA terminal cannot be repaired in the
following cases: the water exposure detection sticker
shows water exposure; tests determine that corrosion
has occurred due to water exposure, condensation,
or perspiration. These cases are not covered by the
warranty, and any repairs that may be possible will be
carried out at the subscriber's expense.
Wipe with a soft, dry cloth (such as a
cloth designed for glasses).
Rubbing the LCD of the FOMA terminal with
a dry cloth may scratch the LCD surface.
The LCD surface may be stained if moisture
or dirt is left on it for a long period.
Never use chemicals such as alcohol,
thinners, benzene or detergents as these
agents may erase the printing on the
FOMA terminal or cause discoloration.
Occasionally clean the connection
terminals with a dry cotton bud, etc.
Soiled connectors may result in poor
connections, loss of power, or incomplete
charging. Wipe with dry cloth or cotton swab.
When cleaning, take care not to damage connectors.
Do not place the FOMA terminal near an air
conditioning vent.
Condensation may form due to rapid
changes in temperature, and this may
cause internal corrosion and malfunction.
Do not put excessive pressure on the
FOMA terminal or battery.
Do not put the FOMA terminal in a bag filled with
many objects or sit down with it in a hip pocket.
Excessive pressure may result in malfunction or
damage to the LCD, internal circuit or the battery pack.
Also, if an external device is connected to the external
connector (earphone/microphone terminal), excessive
pressure may cause connector breakage or malfunction.
Read the separate manuals supplied with the FOMA
terminal, adapter and desktop holder carefully.
Do not scratch the display with metallic objects.
Doing so may cause scratches, malfunction or damage.
Handling the FOMA Terminal
Do not press the surface of the
touchscreen firmly or operate the
touchscreen with sharp edge objects, such
as fingernails, ballpoint pens, and pins.
Doing so may cause touchscreen breakage.
Avoid using the FOMA terminal in
extremely high or low temperatures.
The ambient temperature of the room should
be 5
℃
to 35
℃
with humidity of 45% to 85%.
Reception may be affected if you use
your FOMA terminal near a landline
phone, television, or radio in use. Use the
FOMA terminal away from such devices.
Please keep a separate record of the information
you have registered in your FOMA terminal.
Please be aware that DOCOMO bears no
obligation or responsibility in the event
that data is altered or lost.
Do not drop the FOMA terminal or
expose it to strong shocks.
Doing so may cause malfunction or damage.
When connecting an external device to the external
connector (earphone/microphone terminal), do
not insert at an angle or pull the code.
Doing so may cause malfunction or damage.
Do not fold the FOMA terminal with the
strap pinched between the folding parts.
Doing so may cause malfunction or damage.
It is normal for the FOMA terminal to
become warm while being used or charged.
This is not a malfunction. Keep using it.
Do not leave the camera exposed to
direct sunlight.
Doing so may discolor or burn the
components of the camera.
Keep the external connector (earphone/
microphone terminal) cap and microSD
card slot cap closed when not in use.
Doing so may cause malfunction due to
dust or water getting in.
Do not use FOMA terminal with the back
cover removed.
Doing so may cause the battery pack to
fall out, or cause malfunction or damage.
Do not put an extremely-thick sticker,
etc. on the display, keys or keypads.
Doing so may cause malfunction.
In
tr
oduc
tion
14
Summary of Contents for N-04B
Page 161: ...Kuten Code List...
