j
"Location providing ON"/"Location
providing OFF"/"Unknown blocking"
on the "Location providing setting"
screen
u
"Next"
k
"Send"/"Not send" on the
"Preinstalled apps usage sync"
screen
u
"Next"
l
"OK" on the "Complete setting"
screen
Note
• A data connection (LTE/3G/GPRS)
is required to set online services. For
details on enabling data connection, refer
to "WIRELESS & NETWORKS" (P124).
Configuring Wi-Fi Settings
This terminal connects to the Internet via
access points for Wi-Fi networks or public
wireless LAN services.
To connect, you must configure the access
point connection settings on this terminal.
■ Reception interference caused by Bluetooth
devices
• As this terminal's wireless LAN devices
and Bluetooth device use the same
frequency (2.4 GHz), reception interference
may occur or the communications speed
may lower. Also, you may hear noise or
have a connection problem. In these cases,
do the following:
- Keep the wireless LAN device over 10 m
away from the Bluetooth device.
- Within 10 m, turn off either the wireless
LAN device or the Bluetooth device.
Confirmation and Settings before Using