40
AT+CPIN
Enters the PIN code in the
FOMA terminal.
Format: AT+CPIN="<pin>","<newpin>"
This command is to enter the PIN1,
PIN2, or PUK code - depending on
the state of the result code returned
when AT+CPIN? is entered - of the
FOMA terminal.
Even if PIN code entry or the PUK
code is requested on the screen,
depending on the state of the result
code when AT+CPIN? is entered,
you may not be able to use this
command to enter the PIN. Do not
use this command to change PIN
code. Put <pin> and <newpin> in " ".
AT+CPIN? result
+CPIN
:
READY
:
PIN1 code, PIN2
code
Cannot enter the PUK1 or PUK2
code
+CPIN
:
SIM PIN
:
PIN1 entry
standby
+CPIN
:
SIM PIN2
:
PIN2 entry
standby
+CPIN
:
SIM PUK
:
PIN1 blocked
(Can enter PUK1 code)
+CPIN:SIM PUK2 : PIN2 blocked
(Can enter PUK2 code)
The command displayed on the right
is an entry sample of PIN code
"1234" and PUK code "12345678".
(The status in which
+CPIN: READY is
answered when
+CPIN? is entered)
AT+CPIN="1234"
ERROR
(The status in which
+CPIN: READY is
answered when
+CPIN? is entered)
AT+CPIN="12345678",
"1234"
ERROR
(The status in which
+CPIN: SIM PIN is
answered when
+CPIN? is entered)
AT+CPIN="1234"
OK
(The status in which
+CPIN: SIM PUK is
answered when
+CPIN? is entered:
PIN1 lock status)
AT+CPIN="12345678",
"1234"
OK
(The status in which
+CPIN: SIM PUK2 is
answered when
+CPIN? is entered:
PIN2 lock status)
AT+CPIN="12345678",
"1234"
OK
AT+CPIN?
+CPIN:READY
OK
AT+CPIN=?
OK
AT+CR=
n
[&F] [&W]
When the line is connected,
displays the bearer service
type before the CONNECT
result code is displayed.
n
= 0 : Not display (initial value).
n
= 1 : Display.
<serv>
: Displays only "GPRS", which means
packet communication.
(Displaying "SYNC" or "AV64K"
depending on the line type.)
AT+CR?:
:
Displays the current setting.
AT+CR =1
OK
ATD
*
99
***
1#
+CR : GPRS
CONNECT
AT+CRC=
n
[&F] [&W]
Sets whether to use the
extended result code for the
incoming call.
n
= 0 : Not use +CRING (initial value).
n
= 1 : Use +CRING.<type>.
Format of +CRING:
+CRING
:
SYNC
+CRING
:
AV64K
:
GPRS
PPP
,,,
<APN>
AT+CRC?
:
Displays the current setting.
AT+CRC=0
OK
AT+CRC?
+CRC
:
0
OK
(PPPoverUD received)
+CRING
:
SYNC
(AV64K received)
+CRING
:
AV64K
(PPP packet received)
+CRING
:
GPRS
PPP
,,,
〈
APN
〉
AT command
Outline
Parameter/description
Command execution example
Summary of Contents for PRIME series N-01A
