122
Apps
Please note the following when holding the
terminal over an IC card reader or NFC
module equipped device.
･
Bring the NFC / Osaifu-Keitai position close to
the device slowly without hitting it strongly.
･
Hold the NFC / Osaifu-Keitai position over the
center of the device and parallel to it. If
scanning fails even with it held in front of the
center of the scanner, slightly lift up the
terminal, or move it backwards/forwards or to
the left/right.
･
If there are metal objects between the NFC /
Osaifu-Keitai position for holding over and the
other device, scanning may fail. Putting the
terminal into a case or cover may affect
communication. In that case, remove the case
or cover.
NFC / Osaifu-Keitai position for
holding over
The position for holding over when using
NFC / Osaifu-Keitai is on the front of the
terminal.
1
From the Home screen,
u
[Osaifu-Keitai].
2
Select the service from the service
list.
･
Download an application compatible
with service site or service.
3
Hover the NFC / Osaifu-Keitai
position near the IC card reader.
Notes on holding over the
device
Using "Osaifu-Keitai
compatible service"
NFC
/
Osaifu
-
Keitai
position
for
holding
over
Summary of Contents for xperia XZS SO-03J
Page 1: ...17 4 INSTRUCTION MANUAL...
