12
INTRODUCTION OF OTHER FUNCTIONS
• Loop Recording (
default
)
Loop Recording can be set at 2/3/5 minutes, it means that the video clip
intervals will be set at 2/3/5 minutes long and after memory card is full, the
oldest video clips will be deleted and new video clips will take its place.
If Loop Recording is turned off, it will stop recording when the memory card
is full.
• G-Sensor (default at Middle)
When the internal G-Sensor detects situations like an impact, intense bumps
or hard brakes during Recording Mode, the unit will automatically lock the
current recording to avoid being replaced by loop recording.
• Motion Detection
In Motion Detection Mode, the surrounding of where the car is parked
will be recorded taking the least amount of storage space. Recording will
automatically be turned off after 10 seconds if nothing happens during the
monitor mode. Once there is movement, the unit will start recording
immediately.
* The Motion Detection Mode requires the camera to be connected to a
constant power supply.
When Motion Detection Mode is activated, Monitor Mode/Emergency
Recording
Mode and the G-Sensor function will automatically be
turned off.
• Plate Stamp
Enter your license plate number or desired input, and it will be displayed on the
video footage.
130.com.ua
Autogood products «130»
