Getting Started
3. Turn on Your Vehicle.
Powering from your vehicle through the accessory socket will automatically turn on your
camera and starts recording, and your camera will stop recording and shuts off
automatically when power is turned off.
Note: In specified cars, the power may be constantly supplied to the device even when
the engine is turned off. This may drain the vehicle battery. The optional DOD DP4 kit
equipped with low-voltage protection and is designed to prevent battery drainage.
4. Connecting the Camera Wi-Fi to Your Smart Device.
Download the DOD APP from APP Store on your smart device.
Press the Wi-Fi connection button on the camera to activate. The white LED will flash.
Camera connection, settings and viewing files can now be done within the APP, see
instruction in Page 16-27.
5
. Access to Settings
Upon powering up the camera for the first time or after upgrading the firmware on the
device, you can access to the setting menu via DOD APP and change the settings to
your personal references rather than default.
Your camera will automatically sync via GPS with the time and date to the atomic clock
once the time zone (GMT) is correctly set.
Note: The time zone must be manually adjusted for daylight savings.
12