**Please make sure "Volume" is turned on in setting menu
*Traffic Camera Alert act as a reference and is for reference only, which does not act as an
active radar detector. Please follow all traffic rules and drive safely.
G-Sensor
Measures G-forces. The sensitivity settings can be set off/low/mid/high, If excessive
force is detected, the current recording video will be locked and the file will be saved in
the “RO” directory.
However,
Setting G-Sensor to OFF may result in faulty function in
Parking Surveillance Mode.
Recommended setting: low. Inappropriate setting per environment or road condition
will result in frequently file lock.
Record Audio
Switches the microphone recording on/off.
Can be changed during recording by pressing button
【 】
.
See Page 9 for LED indication.
Parking Surveillance (Default: Off)
When function is enabled, unit will automatically switch to Parking Surveillance Mode if
vehicle is stationary for over 10 minutes.
1. Automatically records videos (both front and rear) when motion is detected within view
range of front or rear camera.
2. Automatically records and locks recording videos (both front and rear) when excessive
force of impact is detected by G-sensor.
3. Camera only records when motion or impact is detected.
4. Unit will return to normal recording mode if vehicle moves continuously for 3 seconds or
longer.
Note:
Parking Surveillance requires consistent power supply via vehicle battery. (It is
recommended to use optional DOD DP4 kit equipped with low-voltage protection design to
prevent battery drainage.
Please ensure to enable G-sensor function in setting menu before switch to Parking
Surveillance. (G-sensor sensitivity Default: Medium)
Parking Surveillance will automatically shut down GPS locating, and will resume when
switched to normal recording mode.
Enabling Parking Surveillance will automatically shut down Time-Lapse function if
previously turned on.
Back lighting will automatically dim when entering Parking Surveillance, and will resume
when exit.
26
