2
SR835 Crossover
FRONT PANEL
1. Power Switch - Used to engage or disengage the power to the SR835.
2. Mono/Stereo Switch - This switch configures the SR835 as two indepen-
dent channels of 2 way splits, or one channel with a 3 way split.When the switch
is in and the LED is lit, the SR835 is in Mono mode.
3. Gain - This is the input level for Channel 1 in Stereo mode, and is the mas-
ter input level in Mono mode.
4. Low Level - This knob controls the volume for the low frequency output in
both Stereo and Mono modes.
5. High Level - This knob controls the volume for the Channel 1 high frequen-
cy output in Stereo mode, and has no function in Mono mode.
6. Frequency - This knob sets the crossover frequency separating the lows
from the mids in Mono mode, and the lows from the highs for Channel 1 in
Stereo mode.
7. Range Switch - When depressed, this switch will multiply the selected
crossover frequency by 10.The LED will light indicating that the markings on the
Frequency knob (6) should be multiplied by 10.
8. Channel 2 Gain - This is the input level for Channel 2 in Stereo mode. In
Mono mode this knob has no function.
9. Low/Mid Level - This knob controls the volume for the Channel 2 low fre-
quency output in Stereo mode, and the mid-range frequency output volume in
Mono mode.
10. High Level - This knob controls the volume for the Channel 2 high fre-
quency output in Stereo mode, and the high frequency output in Mono mode.
11. Frequency - This knob sets the crossover frequency separating the mids
from the highs in Mono mode, and the lows from the highs for Channel 2 in
Stereo mode.
12. Range Switch - When depressed, this switch will multiply the selected
crossover frequency by 10.The LED will light indicating that the markings on the
Frequency knob (11) should be multiplied by 10.
1
2
3
4
5
6
7
8
9
10
11
12
