Dodge CHALLENGER HELLCAT 2017 Owner'S Manual Download | Manualshive

Page: 58 / 484

background image

Infant And Child Restraints

Safety experts recommend that children ride rear-facing in
the vehicle until they are two years old or until they reach
either the height or weight limit of their rear-facing child
restraint. Two types of child restraints can be used rear-
facing: infant carriers and convertible child seats.

The infant carrier is only used rear-facing in the vehicle. It
is recommended for children from birth until they reach
the weight or height limit of the infant carrier. Convertible
child seats can be used either rear-facing or forward-facing
in the vehicle. Convertible child seats often have a higher
weight limit in the rear-facing direction than infant carriers
do, so they can be used rear-facing by children who have
outgrown their infant carrier but are still less than at least
two years old. Children should remain rear-facing until
they reach the highest weight or height allowed by their
convertible child seat.

WARNING!

•

Never place a rear-facing child restraint in front of an
air bag. A deploying passenger front air bag can
cause death or serious injury to a child 12 years or

(Continued)

WARNING!

(Continued)

younger, including a child in a rear-facing child
restraint.

•

Only use a rear-facing child restraint in a vehicle
with a rear seat.

Older Children And Child Restraints

Children who are two years old or who have outgrown
their rear-facing convertible child seat can ride forward-
facing in the vehicle. Forward-facing child seats and con-
vertible child seats used in the forward-facing direction are
for children who are over two years old or who have
outgrown the rear-facing weight or height limit of their
rear-facing convertible child seat. Children should remain
in a forward-facing child seat with a harness for as long as
possible, up to the highest weight or height allowed by the
child seat.

All children whose weight or height is above the forward-
facing limit for the child seat should use a belt-positioning
booster seat until the vehicle’s seat belts fit properly. If the
child cannot sit with knees bent over the vehicle’s seat
cushion while the child’s back is against the seatback, they
should use a belt-positioning booster seat. The child and

56

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
56
57
58
59
60
...
»

Summary of Contents for CHALLENGER HELLCAT 2017





































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CHALLENGER HELLCAT 2017

Brand: GMC Pages: 140

Brand: Harbor Freight Tools Pages: 4

Brand: Jeep Pages: 12

Brand: Jeep Pages: 6

Brand: Vauxhall Pages: 199

SmartDiag2GO GD201-O

Brand: OCTO Pages: 5

Brand: Kia Pages: 54

Brand: Metra Electronics Pages: 2

Brand: Ultra-tow Pages: 14

Brand: Mercedes-Benz Pages: 121

Brand: Menabo Pages: 8

Brand: Camtree Pages: 5

Brand: Würth Pages: 36

Brand: EUFAB Pages: 12

Brand: MULTILIFT Pages: 62

Brand: Ecco Pages: 24

Brand: C-KO Pages: 4

Brand: Discount Car Stereo Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands