WARNING!
To avoid serious injury or death:
• Do not insert any objects into the recep-
tacles.
• Do not touch with wet hands.
• Close the lid when not in use.
• If this outlet is mishandled, it may cause
an electric shock and failure.
Auxiliary Switches — If Equipped
There can be up to five auxiliary switches
located in the lower switch bank of the instru-
ment panel which can be used to power
various electronic devices and PTO (Power
Take Off) – If Equipped. If Power Take Off is
equipped, it will take the place of the fifth
Auxiliary switch. Connections to the switches
are found under the hood in the connectors
attached to the auxiliary Power Distribution
Center.
You have the ability to configure the function-
ality of the auxiliary switches via the instru-
ment cluster display. All switches can now be
configured for setting the switch type opera-
tion to latching or momentary, power source
of either battery or ignition, and ability to
hold last state across key cycles.
NOTE:
Holding last state conditions are met when
switch type is set to latching and power
source is set to ignition.
For
further
information
on
using
the
auxiliary switches, please refer to the Ram
Body
Builders
Guide
by
accessing
www.rambodybuilder.com and choosing the
appropriate links.
PICKUP BOX
The pickup box has many features designed
for utility and convenience.
NOTE:
If you are installing a Toolbox, Ladder Rack or
Headache Rack at the front of the Pickup
Box, you must use Mopar Box Reinforcement
Brackets that are available from an autho-
rized dealer.
You can carry wide building materials (sheets
of plywood, etc.) by building a raised load
floor. Place lumber across the box in the
indentations provided above the wheel hous-
ings and in the bulkhead dividers to form the
floor.
WARNING!
• The pickup box is intended for load car-
rying purposes only, not for passengers,
who should sit in seats and use seat
belts.
• Care should always be exercised when
operating a vehicle with unrestrained
cargo. Vehicle speeds may need to be
reduced. Severe turns or rough roads
may cause shifting or bouncing of the
cargo that may result in vehicle damage.
If wide building materials are to be fre-
quently carried, the installation of a sup-
port is recommended. This will restrain
the cargo and transfer the load to the
pickup box floor.
• If you wish to carry more than 600 lbs
(272 kg) of material suspended above
the wheelhouse, supports must be in-
stalled to transfer the weight of the load
to the pickup box floor or vehicle dam-
age may result. The use of proper sup-
55
Summary of Contents for RAM 1500 2019
