RamBox Storage Bin Cover Emergency Re-
lease Lever — If Equipped
As a security measure, a Storage Bin Cover
Emergency Release is built into the storage
bin cover latching mechanism.
NOTE:
In the event of an individual being locked
inside the storage bin, the storage bin cover
can be opened from inside of the bin by
pulling on the glow-in-the-dark lever at-
tached to the storage bin cover latching
mechanism.
Bed Extender — If Equipped
The bed extender has three functional posi-
tions:
• Storage Position
• Divider Position
• Extender Position
Storage Position
The storage position for the bed extender is at
the front of the truck bed which maximizes
the bed cargo area when not in use.
To install the bed extender into the storage
position, perform the following:
1. Make sure the center handle is unlocked
using the vehicle key and rotate the center
handle vertically to release the extender
side gates.
2. With the side gates open, position the
extender fully forward in the bed against
the front panel.
3. Rotate the side gates closed allowing the
outboard ends to be positioned in front of
the cargo tie down loops.
4. Rotate the center handle horizontally to
secure the side gates in the closed
position.
5. Lock the center handle using the vehicle
key to secure the panel into place.
Divider Position
The divider position is intended for managing
your cargo and assisting in keeping cargo
from moving around the bed. There are 11 di-
vider slots along the bed inner panels which
allow for various positions to assist in man-
aging your cargo.
To install the bed extender into a divider
position, perform the following:
1. Make sure the center handle is unlocked
using the vehicle key and rotate the center
handle vertically to release the extender
side gates.
2. With the side gates open, position the
extender so the outboard ends align with
the intended slots in the sides of the bed.
3. Rotate the side gates closed so that the
outboard ends are secured into the in-
tended slots of the bed.
4. Rotate the center handle horizontally to
secure the side gates in the closed
position.
5. Lock the center handle to secure the
panel into place.
Extender Position
The extender position allows you to load the
bed of the truck beyond the tail gate. The bed
extender will add an additional 15 inches
(38 cm) in the back of the truck when addi-
GETTING
TO
KNOW
YOUR
VEHICLE
58
Summary of Contents for RAM 1500 2019
