Note:
finding all devices can take several minutes. Devices are not auto
-
matically assigned to groups.
Data is then transferred to the devices and the user is automatically
taken back to the "Number of devices" menu item.
5.5.4
Device diagnostics
Detailed diagnostic information for devices can be obtained in the “Dev
diagnostics” submenu. After pressing one of the middle keys ("Start"),
the message “No error” appears or one or more messages as shown
in Section 4.3 “Display of system and error messages” on page 9
appear. You can enable the automatic display of diagnostic information
during operation in the system settings under “Dev diagnostics”.
5.6
Organising lighting groups
The gateway supports the use of up to 16 lighting groups as provided for
in the DALI specification. The composition of the groups, the assignment
of control inputs and feedback outputs and their configuration can be
defined in the "Lighting group setup" menu.
S e t - u p
�
L i g h t
g r o u p s
�
①
②
③
④
Note:
if you have not yet taught-in any device, "Teach-in device" appears
briefly instead. In this case, first teach-in the connected control gear as
described in Section 5.5 “Logging devices in and out” on page 16.
5.6.1
Lighting group overview
L i g h t
g r o u p s
�
O v e r v i e w
�
①
②
③
④
The status of groups 1 to 16 is displayed in the
Group overview
menu:
20
Doepke
