• Flags
The lags are a temporary visual aid for your dog during the training process. They enable your dog to
visualize the area where he can move freely and the boundaries he must not cross.
We recommend installing the lags at the inner edge of the warning zone at short intervals. Do not
place the lags at the antenna wire.
Once your dog is familiar with the boundaries, the lags can be gradually removed.
•
Layout of your installation
Before starting the installation of your pet fencing system, it may be useful to draw a layout of the
installation.
Once the installation is completed, note the location of the wire connectors on the layout you drew for
future reference. In case of connection default, you will ind them more easily.
Two adjustable zones
WARNING AND STIMULATION
Twisted wire
SIGNAL CANCELED,
THE DOG CAN GO BACK AND FORTH
Antenna wire
By twisting the
outward strand
with the inward
strand, wave
emission is blocked
and the animal can
move freely within
this zone.
Diagram 1
Sample installation
AUTOMATIC SYSTEM
As soon as the animal wearing a collar enters the protected area, he is warned by beep sounds.
If he continues to move forward, towards the antenna wire, the collar emits stimulations.
The antenna wire is placed on the ground, buried or raised on an existing fence.
For the system to function, the wire must form a continuous loop.
5
Summary of Contents for EF-4000
Page 1: ......