EF-4000 TRANSMITTER
Install or replace the battery
To intall or replace your collar battery, proceed
in the following way:
•
Unscrew the 4 screws on the battery cover
•
Insert the battery (CR2) in the position indicated
EF-4000 RECEIVER COLLAR
7
Antenna socket
Connection to
power unit
Blue indicator light
showing transmitter is ‘on’
Potentiometer for
setting the warning zone
(beeps)
Switch for setting
the stimulation zone
Diagram 2
EF-4000 Transmitter
Button for
adjusting
stimulation
intensity
Diagram 3
EF-4000
Receiver Collar
Battery position
Diagram 4
EF-4000
Receiver Collar
contact points
TURNING THE TRANSMITTER ON / OFF
•
Connect to the power source to turn the transmitter on. The light indicator will turn blue. See diagram 2.
•
Disconnect the transmitter from the power source to turn it of. The blue light will turn of. See diagram 2.
NOTE:
Connect the transmitter to the wire before turning it on. Otherwise, the transmitter will emit a beep
to inform you of a connection failure.
Summary of Contents for EF-4000
Page 1: ......