- 4 -
<Please Check the Defecation Board Assembly Parts.>
· 2 transparent hoses (long, short)
· 2 nozzles, 2 L fittings, 3 fixing rod hooks, transmitter sensor ( fixing rod),
collecting channel passage cover, 6 screws
· Power supply 12V adapter, stainless strainer, 3 rubber feet
· Other parts separately
<Understanding the Defecation Board>
· Please note that the circular whitening on the Board is not a defect, but is inevitable
outcome caused by the injection pressure due to the deep and many supports.
This occurs when the color is dark.
· Do not remove the rib at the corner of the defecation board as it is a support for the
mesh plate.
· Use the extra rubber feet to align it as horizontally as possible, and the slight wobble
or twist will return to normal by gravity after time.
<Product Features>
· This is a flush-type automatic defecation board for medium and large dogs.
· It is detected when the dog urinates and automatically cleaned after 2 minutes.
· It is a pleasant eco-friendly system with no odor and no waste.
· There is no movement, so the dog can use it easily and comfortably.
· The water filling amount is 10L, and it can be used 10 times, 1L each time.
· It is convenient to clean up with a simple defecation board separation within
10 seconds.
· There is an option for a 26cm tall male stand that can be used by large dogs.
· This is a trouble-free infrared transmission/reception, electronic spider web sensor.
· When the sensor jack is plugged in, if blue light is on, it is in standby (ready) state.
· When the washing water quantity increase switch is turned on, the amount of washing
water increases to 1.5L each time.
· In the case of a direct type Super, if it is turned on, it is sufficiently washed twice
every 1500cc.
· There is a red one-touch power button 'on the right side of the Side'.
· There is a black manual wash button 'on the left side of the Side'.
· It is a safe system without electric shock with 12V power.
Defecation Board Assembly Parts
and Product Features
