- 5 -
* Since it is plastic, when screwing in the screw, press it down slightly and do not tighten it too forcibly.
Align the direction of the nozzle
and insert it into the upper part of
the defecation board.
Fix the fixing rod hook in the same
direction with screws.
Insert the transmitter LED sensor
into the fixing rod.
Fix the collecting channel
passage cover with screws.
Tighten the nozzle by turning
the screw from the bottom.
Connect a short transparent
hose through the hook and plug it
into the silicone.
Make sure the sensor line passes
in the upper left corner.
Insert the rubber feet into the
3 legs with arrows.
Insert the fitting deeply into
the 2 inlets.
Pass the transparent hose and
sensor line through the hook.
When the screw is tightened,
the transmitter LED enters
the upper hole.
Place the stainless strainer in
the circular collecting channel.
How to Assemble
the Defecation Board
