- 7 -
<About the Sensor>
· The sensor consists of an infrared transmitter protruding from the defecation board and
a receiver (black) on the body side.
· When infrared rays are transmitted and received every 0.5 seconds, it is in a normal
standby state and blue light is on. If there is an infrared light jam in the middle, the green
light blinks and water is sprayed after 2 minutes. Check that foreign objects do not cover
the front of the receiver.
· If the sensor jack is poor in contact or transmission/reception is bad, the green light turns
on and it operates continuously, so temporarily unplug the jack and manually press the
button to use.
· Please note that the sensor may be operated by sunlight, remote control, or strong light.
· Make the eaves by applying wide tape on the top to prevent water from flowing into the sensor jack.
· The sensor jack is sensitive, so if there is moisture or water, wipe it dry before inserting it.
· The male stand is a material through which infrared rays pass. If there is any foreign
substance on the front of the receiver, wipe it clean.
Artificial intelligence LED judging by color
Errorless, facing infrared sensor
Sensor transmitter
Sensor receiver(Automatic
cleaning after 2 minutes when
the sensor operates.)
Lower part of sensor
transmitter
Green
Power On
Blue
Waiting for sensor after connecting sensor jack
Red
No water
Green light
In operation, wash after 2 minutes
Purple light
Water overflow prevention sensor operation due to
discharge pump failure
Yellow light
Hose clogged, discharge pump stops after 5 minutes
of continuous operation
About LED Colors
and Sensors
