44
45
6. CHECKING THE STATUS USING THE
LED INDICATOR
When the receiver/collar is on and ready
to operate, the LED flashes every 4
seconds. The LED will glow steadily on
both handheld transmitter and receiver/
collar while any buttons are pressed.
The LED color indicates battery life level.
Green
= full charge,
Amber
= medium,
Red
= needs charge
If you continue to operate the unit when
the LED is red (needs charge), it will shut
down.
6. CHECKING THE STATUS USING THE LED INDICATOR
7. CHARGING THE BATTERY
7. CHARGING THE BATTERY
1. Remove the rubber plug temporarily and
plug in the charger.
2. Plug the adapter’s power plug into a
standard AC wall outlet. The LED will
glow red.
3. When charging is finished the LED
will glow green. Unplug the adapter’s
power plug from the AC wall outlet and
disconnect the charger from the unit.
4. Place the rubber plug back in the
battery charging receptacle.
*
The receiver/collar is still fully
waterproof even if the rubber plug is
not closed, but place the rubber plug in
the battery charging receptacle to make
sure dirt does not get inside.
*
To charge multiple receivers/collars and
a transmitter, combine additional battery
charger splitter cables as shown.
Summary of Contents for iQ plus
Page 1: ...01 02 ...
