45
ENGLISH
TIP:
If the stimulation impulse is send to a dog using mobile phone application,
the strength of the stimulation impulse for this dog is automatically adjusted to
the set value in the receiver and vice versa.
Light feature (flash):
(ONLY GPS X30T)
The light feature may be used to locate the dog in the dark. The function is activated
in
MENU
. The start-up procedure is the same as for the selection of the acoustic
signal volume strength, with the difference that in
Point 4
,
is selected and
in
Point 5
,
is selected. A simpler option is to activate the feature
in the Dogtrace
GPS application
.
8.3 Compass feature – determining the North
The
N
symbol indicates the direction of the magnetic north. If the two arrows are
simultaneously lit, direction to the North is between them.
8.4 FENCE – acoustic boundary
The FENCE feature alerts you when the dog moves beyond the set area boundary,
which is adjustable within the range of 30 m to a maximum of 2 km from the receiver.
The FENCE feature may be activated for more dogs; settings are stored for each dog
separately.
If the dog moves beyond the set boundary, the receiver will emit long intermittent
beeping and the circle, for this dog, located under the direction indicator will flash
on the receiver display. To find out which dog has crossed the set boundary, switch
between paired transmitters until you find the flashing circle.
When this feature is turned on, the receiver must have good GPS signal:
1.
Select the dog number for which you wish to enable FENCE on the main navigation
panel.
2.
Long press the
FENCE
push button.
3.
Set the acoustic boundary distance by / arrows.
4.
Press briefly to return to the main screen.
After the feature is turn on,
FENCE
is displayed on the main panel display. The top
line of the display shows
FENCE
if the feature is activated on at least one of the
collars paired with the receiver.
If the receiver starts to emit shorter intermittent beeping, it signifies that the
transmitter (collar) or the receiver does not have the GPS or RF signal. This may
happen if the dog enters building where no GPS signal is available, the RF signal is
out of range or the dog's transmitter battery is flat.
WARNING:
Receiver should have the strongest GPS signal to ensure that the
FENCE feature is accurate. If the signal is weak, indication that dog crossed the
boundary will not be accurate (given by the GPS accuracy).
(handset) navigation main panel by simultaneously pressing the +
FENCE
push
buttons.
