TURNING 'ON' THE SIDEWALKER
To turn the SideWalker ‘on’, rotate the dial clockwise
from ‘0’ (off) to the desired setting. This can be done
using your fingers or a coin.
To allow time to put the collar on the dog, the Pressure
Sensor will not activate for 10 seconds after turning it '
on'
.
6
SENSOR SETTINGS
Vibration Setting and Settings 1-3
• When the dog pulls, the level of
the vibration or stimulation (for
that setting) gradually increases.
• When the dog stops pulling, the
SideWalker re-sets to the lowest
level for that setting.
Progressive Setting
Setting ‘P’ begins with vibration and then automatically
progresses from l
ow
to h
igh
stimulation if the dog
continues to pull. When the dog stops pulling, the
SideWalker re-sets to vibration in the ‘P’ setting.
The SideWalker has 5 settings.
SETTINGS
O ‘
off’
V
Vibration only
1
Low
2
Med
3
High
P
Progressive
stimulation
Off
Vibration
Low
Medium
High
Progressive
